Two buyers ordered the same wholesale Sourcing in the same month. One paid 9% less and absorbed 23 rejects out of 800 pieces; the other paid our quote and shipped clean. The difference was prong geometry, and it was measurable on both benches, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 36-199.
Nothing in that rejection was exotic. At USD 36-199 per piece and 800 pieces on the order, a prong geometry rate of two percent is a costing error rather than a quality mystery.
Cost of the fix was about 22 seconds per piece. On 800 pieces that is a few hours at the bench and the whole claim file disappears, quoted at USD 36-199 per piece in bulk carton, 50 per bag.
The cost of a wholesale Sourcing in the USD 36-199 band splits roughly as below. The line buyers challenge most is labor, and it is the line that decides whether the piece survives a season.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for wholesale Sourcing | 34% | Alloy choice and casting yield |
| Stone or melee for wholesale Sourcing | 25% | Sieve range and lot batching |
| Setting and finishing labor for wholesale Sourcing | 22% | Jig design and bench minutes |
| Plating, polish and QC for wholesale Sourcing | 15% | Per-tray versus per-piece checks |
| Packaging for wholesale Sourcing | 4% | bulk carton, 50 per bag |
If a supplier will not break out the five lines above, the number you are comparing is not a price. It is a total that somebody else assembled from assumptions, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 36-199.
Four numbers separate a 800-piece run that clears inspection from one that generates a credit note. None of them appears on the sample photo, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
None of these are premium features. They cost seconds per piece and they remove the reason a buyer has to inspect twice, priced at USD 36-199 for the 800-piece Distributor Tier run.
A distributor does not buy a wholesale Sourcing, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, and the Distributor Tier quote for it sits at USD 36-199.
Turn is the number the distributor manages. At USD 36-199 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of wholesale Sourcing move in 800-piece lots rather than in the 50-piece sample quantity.
A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, which is how the Distributor Tier account reads it at USD 36-199.
The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and the Distributor Tier quote for it sits at USD 36-199.
A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, priced at USD 36-199 for the 800-piece Distributor Tier run.
Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, quoted at USD 36-199 per piece in bulk carton, 50 per bag.
A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, and at USD 36-199 for 800 pieces that is the number the buyer signs.
In a 800-piece run this typically shows on 17 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, the figure being USD 36-199 for a 800-piece run.
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which is USD 36-199 on the Distributor Tier schedule.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 36-199 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, the figure being USD 36-199 for a 800-piece run.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is USD 36-199 on the Distributor Tier schedule.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, shipped as bulk carton, 50 per bag and certified SGS batch report.
It is not a marketing point on wholesale Sourcing. It is the number that decides whether the second order happens, quoted at USD 36-199 per piece in bulk carton, 50 per bag.
One practical note on timing for wholesale Sourcing: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
We date the wholesale Sourcing proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
Buyers who have run three programs on wholesale Sourcing know this instinctively; first-time buyers learn it the expensive way, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
In North American retail terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For wholesale Sourcing, we publish the figure per SKU and hold it for the order window rather than for the calendar year, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Practically, it shows up in three places for wholesale Sourcing: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, which is USD 36-199 on the Distributor Tier schedule.
The calendar below is what we quote on a 800-piece Distributor Tier run of wholesale Sourcing. It starts when the spec is signed, not when the deposit clears, shipped as bulk carton, 50 per bag and certified SGS batch report.
A first order of 50 pieces is a measurement, not a purchase. It tells you what stone retention after a 40-cycle wear test looks like from this bench, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
We ship from Guangzhou or Shenzhen and pick the port on the carrier rate, not on habit. SGS batch report travels with the shipping documents, on a 800-piece Distributor Tier order at USD 36-199.
DDP removes the duty invoice that arrives after the carton clears, which matters on a first Distributor Tier order at USD 36-199.
Three steps at the dock: count against the packing list, weigh a sample tray, measure ten pieces. None needs a lab, the figure being USD 36-199 for a 800-piece run.
At 800 pieces inside bulk carton, 50 per bag, the first order reads sell-through without betting the season on one model, the figure being USD 36-199 for a 800-piece run.
Buyers who run that measurement before committing a season usually keep the supplier. Buyers who skip it usually pay twice for the same lesson, and at USD 36-199 for 800 pieces that is the number the buyer signs.
Rhodium at 0.20 micron minimum on white wholesale Sourcing, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, and at USD 36-199 for 800 pieces that is the number the buyer signs.
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, on a 800-piece Distributor Tier order at USD 36-199.
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, the figure being USD 36-199 for a 800-piece run.
Rhodium at 0.20 micron minimum on white wholesale Sourcing, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, and at USD 36-199 for 800 pieces that is the number the buyer signs.
If you are quoting wholesale Sourcing against another supplier, send that quote. We will mark the four lines where the numbers diverge and let you decide, which is USD 36-199 on the Distributor Tier schedule.
The factory behind wholesale Sourcing here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, the figure being USD 36-199 for a 800-piece run.
Related reading: Wholesale Sourcing Trade Show Sample: What the Quote Actually Covers - HOLYCOME Certification Explained Shopify DTC: The Sample Approval That Survives Production - HOLYCOME
Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.
Contact on WhatsApp service@holycome.comWritten by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.
Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.
Reviewed for accuracy by our quality team before publication. Last updated .