In November, a US buyer of wholesale Sourcing ordered 50 wholesale Sourcing and asked for the same lost-wax cast as a competitor's sample. What arrived matched the photo and missed the drawing, and 13 pieces had to be reworked at the buyer's expense, on a 50-piece Bridal Boutique order at USD 43-241.
In the Bridal Boutique file the failure was already written down. Prong geometry sat in the buyer's own incoming report from the previous season and nobody carried it forward, so the same line failed twice, and 50 pieces leaves Wuzhou in two-piece bridal box at USD 43-241.
The second run shipped two-piece bridal box with the spec stapled to the packing list. Zero rejects on arrival, and the buyer's own bench stopped re-inspecting, which is how the Bridal Boutique account reads it at USD 43-241.
Specification is the only part of a wholesale Sourcing quote that survives the season. These four measurements are what we write into the two-piece bridal box paperwork, the figure being USD 43-241 for a 50-piece run.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
| Plating thickness | Nominal only | 0.20 micron rhodium logged per lot, 3 microns on vermeil | Wear-through inside one season |
| Surface porosity after polish | Seen after plating | Cast porosity checked before plating, rejects pulled at that stage | Plating blister six weeks later |
Every line above is measurable with a gauge and a scale. At USD 43-241 per piece, a supplier who cannot state them is selling a photo.
A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, the figure being USD 43-241 for a 50-piece run.
In a 50-piece run this typically shows on 8 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, and the Bridal Boutique quote for it sits at USD 43-241.
A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, and the Bridal Boutique quote for it sits at USD 43-241.
The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, with IGI report and two-piece bridal box stated on the same sheet.
A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, on a 50-piece Bridal Boutique order at USD 43-241.
Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, which is how the Bridal Boutique account reads it at USD 43-241.
The 50-piece Bridal Boutique price splits as below. The line that decides season two is the plating and QC share, not the metal, and the Bridal Boutique quote for it sits at USD 43-241.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for wholesale Sourcing | 34% | Alloy choice and casting yield |
| Stone or melee for wholesale Sourcing | 25% | Sieve range and lot batching |
| Setting and finishing labor for wholesale Sourcing | 22% | Jig design and bench minutes |
| Plating, polish and QC for wholesale Sourcing | 15% | Per-tray versus per-piece checks |
| Packaging for wholesale Sourcing | 4% | two-piece bridal box |
Five lines, one price. If the supplier will not break them out, the number being compared is not a wholesale Sourcing price, priced at USD 43-241 for the 50-piece Bridal Boutique run.
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Bridal Boutique order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and at USD 43-241 for 50 pieces that is the number the buyer signs.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 43-241 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the two-piece bridal box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, priced at USD 43-241 for the 50-piece Bridal Boutique run.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, on a 50-piece Bridal Boutique order at USD 43-241.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, certified IGI report and packed two-piece bridal box at 50 pieces.
A bridal account buys a sample tray first and stock later. The tray has to cover the sizes the boutique actually fits, which in practice means one sample in each half size from five to eight, so eight pieces per design rather than one, shipped as two-piece bridal box and certified IGI report.
Consignment terms change what you order. A boutique that takes wholesale Sourcing on consignment wants a marked retail price on the tag, an exchange window, and a certificate in the box the bride can photograph. We supply the IGI report in a card sleeve for exactly that reason, the figure being USD 43-241 for a 50-piece run.
The calendar matters more than the price. Brides buy between January and April for a summer wedding, so the tray has to be on the counter by December. A March order arrives after the decision has already been made, the figure being USD 43-241 for a 50-piece run.
This is the question that separates a trading company from a factory, and on wholesale Sourcing the answer is usually shorter than buyers expect, which is USD 43-241 on the Bridal Boutique schedule.
The buyers who get the most out of wholesale Sourcing treat the first order as a measurement, not as a purchase. They buy a small run, measure the four numbers that matter, and then commit, certified IGI report and packed two-piece bridal box at 50 pieces.
We support it directly on wholesale Sourcing: a 50-piece test run per design, the same gauge standard as a bulk order, and the same retained tray. Small does not have to mean loose, and at USD 43-241 for 50 pieces that is the number the buyer signs.
Buyers ask it in the first call about wholesale Sourcing and rarely get a number they can put in a spreadsheet, and at USD 43-241 for 50 pieces that is the number the buyer signs.
What buyers underestimate on wholesale Sourcing is the cost of the interruption, not the cost of the piece. A missing 6% of a run stalls a launch, and a stalled launch costs more than the 6% ever did, which the Bridal Boutique file records at USD 43-241 in two-piece bridal box.
We plan a 3-5% buffer on first runs of wholesale Sourcing and tell the buyer it exists. Hiding a buffer and shipping it as production is how a supplier trains a buyer to distrust the count, and the Bridal Boutique quote for it sits at USD 43-241.
We ship from Guangzhou or Shenzhen, and the port choice follows the carrier rate rather than a fixed habit, which is how the Bridal Boutique account reads it at USD 43-241.
DDP suits a first Bridal Boutique order because the duty invoice arrives after the carton clears, and that is the line buyers forget to budget, which is how the Bridal Boutique account reads it at USD 43-241.
The arrival check is three steps and none needs a lab: count against the packing list, weigh a sample, measure ten pieces, quoted at USD 43-241 per piece in two-piece bridal box.
Our process is deliberately boring, because boring is what survives a bulk run with several sets of hands on it, and the Bridal Boutique quote for it sits at USD 43-241.
A first order at 50 pieces per design is a measurement rather than a purchase. It tells you what stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm looks like from this line, and 50 pieces leaves Wuzhou in two-piece bridal box at USD 43-241.
The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, certified IGI report and packed two-piece bridal box at 50 pieces, on a 50-piece Bridal Boutique order at USD 43-241.
Put the reject rule in writing before the deposit. The Bridal Boutique conversation after arrival is shorter when the rule is on the order already, priced at USD 43-241 for the 50-piece Bridal Boutique run.
IGI report on wholesale Sourcing above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of stone retention after a 40-cycle wear test, which is what a counter or a listing actually needs, and the Bridal Boutique quote for it sits at USD 43-241.
We replace or credit inside the same order cycle. The retained reference tray decides: if prong geometry shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, shipped as two-piece bridal box and certified IGI report.
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, shipped as two-piece bridal box and certified IGI report.
50 pieces per wholesale Sourcing. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which is how the Bridal Boutique account reads it at USD 43-241.
IGI report on wholesale Sourcing above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of stone retention after a 40-cycle wear test, which is what a counter or a listing actually needs, and the Bridal Boutique quote for it sits at USD 43-241.
Send a photo or a drawing of the piece you want in two-piece bridal box, and the reply carries a price, a calendar and the four measurements, the figure being USD 43-241 for a 50-piece run.
The factory behind wholesale Sourcing here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, quoted at USD 43-241 per piece in two-piece bridal box.
Related reading: Wholesale Sourcing Distributor Tier: The Reject Tray Policy That Decides a Partnershi - HOLYCOME Certification Explained Amazon FBA Ready: What a Report Proves and What It Does Not - HOLYCOME
Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.
Contact on WhatsApp service@holycome.comWritten by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.
Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.
Reviewed for accuracy by our quality team before publication. Last updated .