Most buyers who contact us for the first time are comparing one number: the unit price on a quote sheet. That number is real, but it is only the factory gate. By the time goods reach your warehouse in Los Angeles or Rotterdam, five or six other costs have attached themselves to it. If you build a retail or wholesale margin on the gate price, you will find out in month two that you are thinner than you planned.
I have run QC on this floor for twelve years. I have watched buyers get surprised by freight, by duty codes, by payment fees, and by the cost of a single bad batch. This article is the math I would do myself before wiring a deposit on a first order. No theory, just the numbers in the order they hit you.
On a moissanite or 925 silver quote, the unit price should already include the stone, the metal, the setting labor, the polish, and the individual GRA card for moissanite pieces. Ask for that list in writing. If a supplier quotes a suspiciously low number, one of those items is billed separately later, usually the certificate or the plating.
For context on our own pricing: our cost, speed and yield run roughly 20% better than a typical trading company. The reason is boring. We cut and set in the same building, so there is no middleman markup and no second freight leg between the stone house and the setting bench. Trading companies quote from a spreadsheet they received from someone else.
Freight is where first-time buyers lose the most accuracy. A 5 kg parcel of silver rings and a 40 kg carton of boxed sets are different problems. Air express on small parcels is priced by chargeable weight, which is the greater of actual weight and volumetric weight. Volumetric weight punishes bulky packaging, so ask your supplier to pack tight and skip gift boxes on the first run unless you need them for photography.
For DDP delivery to US and EU addresses, we run 5 to 8 days door to door, with duty and clearance handled inside the quote. That matters more than it sounds. If you buy FOB and arrange your own clearance, you need a customs broker, a duty classification, and a bond. On a first order of a few thousand dollars, the broker minimum alone can add several hundred dollars of fixed cost that does not scale down.
Rule of thumb from our floor: on a first order under 20 kg, DDP almost always beats FOB once you count broker fees, bond, and the staff hours you spend chasing clearance.
Duty depends on the harmonized code and the destination. Silver jewelry and imitation jewelry do not share a code, and a moissanite ring classified as imitation jewelry can land at a different rate than the same ring classified as silver jewelry with stones. Get the code on the commercial invoice and confirm it with your broker before the goods ship, not after.
Then add import VAT or sales tax depending on your jurisdiction. In the EU this is usually recoverable if you are VAT registered, but it is still cash out of your account for four to ten weeks. That is a working capital cost, and on a first order it can be the difference between reordering in six weeks or in four months.
Bank wires carry a sending fee, a receiving fee, and a spread on the exchange rate. On a small first order, those three can quietly total 1.5% to 3% of the invoice. PayPal for samples is convenient and fast, but the fee sits around 3% to 4.5% depending on the corridor, so do not use it for a full production run unless the amount is small.
| Cost line | Typical basis | Where it hides |
|---|---|---|
| Unit price | Per piece, ex-works | Certificate or plating billed separately |
| Freight | Chargeable weight | Packaging volume, not grams |
| Duty and tax | HS code times declared value | Wrong code on the invoice |
| Payment fees | 1.5% to 4.5% of invoice | Wire spread and PayPal fee |
| QC risk | Defect rate times rework cost | Not budgeted at all |
Every first order carries a defect allowance whether you write it down or not. The question is whether you find the defects in your warehouse or your customer finds them. Our process is three stages: incoming stone check before setting, in-process inspection at the bench, and a pre-ship AQL sampling pull on the finished lot. That catches most stone color drift, prong gaps and plating thinness before the carton closes.
Budget 2% to 3% of order value for potential rework or replacement, and treat anything under that as a good run. If a supplier cannot describe their inspection stages in specific terms, assume the allowance needs to be higher. Vague answers about quality control are themselves a cost signal.
Say you order 300 moissanite solitaire pendants with 925 silver chains at a unit price of 9.00 USD. Goods value is 2,700 USD. Air DDP freight on roughly 12 kg lands near 260 USD. Duty and import tax at destination add about 210 USD. Payment fees on a wire deposit and balance run about 55 USD. QC allowance at 2.5% is 68 USD.
Total landed is about 3,293 USD, or 10.98 USD per piece. That is the number to build your margin on, not 9.00. If you were planning a 2.5x retail markup off the unit price, you were actually planning closer to 2.05x. Same order, different business.
Run this math once and the second order gets faster. You will know your freight per kilo, your duty rate, and your real defect rate. That is when wholesale sourcing stops being a gamble and becomes a repeatable calculation. Send your SKU list and target quantity to service@holycome.com or WhatsApp +86 133 7744 7107 and we will build the landed cost sheet with you line by line.
Stock moissanite and 925 silver pieces start at 1 pc, so you can order a single sample to check setting quality and stone color. Custom designs or custom stone mixes require 30 pcs per SKU. Sample orders can be paid by PayPal for speed.
Custom production runs 12 to 18 days after deposit and design sign-off. DDP delivery then takes 5 to 8 days door to door to US and EU addresses. Stock items ship faster because they skip the production window entirely.
Quotes are per piece, ex-works, and include the stone, metal, setting labor and the GRA card for moissanite. IGI certification on lab-grown diamond is quoted as a line item because the fee varies by stone size. Freight and duty are quoted separately so you can see each cost.
Send us your SKU list, target quantity and delivery city, and we will return a quote broken into unit cost, freight, duty estimate and payment fees so you can see the full landed number before any deposit moves. Samples are available at MOQ 1 pc if you want to inspect the setting yourself first.
Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.
Contact on WhatsApp service@holycome.comWritten by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.
Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.
Reviewed for accuracy by our quality team before publication. Last updated .