A US buyer of wholesale Sourcing came to us after 100 wholesale Sourcing from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: prong geometry had drifted far enough that the buyer's own bench could not correct it without recutting, and at USD 39-220 for 100 pieces that is the number the buyer signs.
The bench did not miss the defect, it was never asked to look for it. Prong geometry was absent from the purchase order, and a defect that is not named cannot be rejected on arrival, which is USD 39-220 on the Shopify DTC schedule.
The rebuild held the USD 39-220 quote and changed the plating log, the gauge and the tray rule. Second run shipped gift box with sleeve with zero rejects.
A storefront lives on photography and return rate, not on the wholesale price. The same wholesale Sourcing that sells at a boutique counter needs a second and third angle, a scale reference, and one photograph of the clasp or gallery because that is the part a customer cannot see before buying, shipped as gift box with sleeve and certified IGI report.
Returns on jewellery from a storefront cluster around sizing and expectation, not quality. Publishing the millimetre width and the exact gram weight cuts the sizing return before it happens, and a printed care card inside the gift box with sleeve cuts the tarnish complaint, and the Shopify DTC quote for it sits at USD 39-220.
Shipping weight decides whether you can offer free carriage. At 100 pieces a mixed carton of wholesale Sourcing usually breaks into individual mailers under four ounces, which keeps a USPS or carrier rate flat instead of dimensional, shipped as gift box with sleeve and certified IGI report.

A Shopify DTC quote that states only metal and stone size leaves prong geometry undefined, and undefined is what gets rejected on arrival, and the Shopify DTC quote for it sits at USD 39-220.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Plating thickness | Nominal only | 0.20 micron rhodium logged per lot, 3 microns on vermeil | Wear-through inside one season |
| Surface porosity after polish | Seen after plating | Cast porosity checked before plating, rejects pulled at that stage | Plating blister six weeks later |
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
Nothing here adds cost at USD 39-220. It adds documentation, and documentation is what the gift box with sleeve carton is missing.
A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, priced at USD 39-220 for the 100-piece Shopify DTC run.
The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and the Shopify DTC quote for it sits at USD 39-220.
A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, and at USD 39-220 for 100 pieces that is the number the buyer signs.
Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, quoted at USD 39-220 per piece in gift box with sleeve.
A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, which is how the Shopify DTC account reads it at USD 39-220.
In a 100-piece run this typically shows on 17 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, and 100 pieces leaves Wuzhou in gift box with sleeve at USD 39-220.
Buyers assume the stone dominates the cost of a wholesale Sourcing. At wholesale it is closer to a quarter, and the labor line is where two quotes for the same drawing diverge by double digits, and the Shopify DTC quote for it sits at USD 39-220.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for wholesale Sourcing | 32% | Alloy choice and casting yield |
| Stone or melee for wholesale Sourcing | 23% | Sieve range and lot batching |
| Setting and finishing labor for wholesale Sourcing | 21% | Jig design and bench minutes |
| Plating, polish and QC for wholesale Sourcing | 14% | Per-tray versus per-piece checks |
| Packaging for wholesale Sourcing | 10% | gift box with sleeve |
The cheapest quote for wholesale Sourcing usually hides its saving in the plating line and the stone grade. Both show up in the second season, not the first, and 100 pieces leaves Wuzhou in gift box with sleeve at USD 39-220.
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Shopify DTC order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and at USD 39-220 for 100 pieces that is the number the buyer signs.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 39-220 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the gift box with sleeve format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which the Shopify DTC file records at USD 39-220 in gift box with sleeve.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, priced at USD 39-220 for the 100-piece Shopify DTC run.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, shipped as gift box with sleeve and certified IGI report.
This is where wholesale Sourcing stops being a commodity and starts being a supply relationship, and 100 pieces leaves Wuzhou in gift box with sleeve at USD 39-220.
What buyers underestimate on wholesale Sourcing is the cost of the interruption, not the cost of the piece. A missing 6% of a run stalls a launch, and a stalled launch costs more than the 6% ever did, certified IGI report and packed gift box with sleeve at 100 pieces.
We plan a 3-5% buffer on first runs of wholesale Sourcing and tell the buyer it exists. Hiding a buffer and shipping it as production is how a supplier trains a buyer to distrust the count, which is how the Shopify DTC account reads it at USD 39-220.
The figure below is what we quote for wholesale Sourcing, and it is deliberately narrower than the market average, and the Shopify DTC quote for it sits at USD 39-220.
The commercial version of this question for wholesale Sourcing is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, certified IGI report and packed gift box with sleeve at 100 pieces.
That clause matters more than a discount on wholesale Sourcing. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, on a 100-piece Shopify DTC order at USD 39-220.
The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, shipped as gift box with sleeve and certified IGI report, and 100 pieces leaves Wuzhou in gift box with sleeve at USD 39-220.
Sample in 3-5 days, bulk in 15-20 days under 500 pieces. At 100 pieces the calendar is the same on every Shopify DTC run, which is USD 39-220 on the Shopify DTC schedule.
The calendar below is what we quote on a 100-piece run of wholesale Sourcing. It starts when the spec is signed, not when the deposit clears, the figure being USD 39-220 for a 100-piece run.
MOQ stays at 50 pieces per design on the Shopify DTC program, low enough to test a category and high enough to keep the casting line accountable, shipped as gift box with sleeve and certified IGI report.
For a Shopify DTC order at 100 pieces the carton count decides the freight more than the weight does. gift box with sleeve packs tighter than a display tray, which is how the Shopify DTC account reads it at USD 39-220.
The freight rate matters less than the clearance terms at USD 39-220 per piece. A duty surprise can cost more than the entire freight line.
At receiving, count cartons, weigh one tray of gift box with sleeve and measure ten pieces against stone retention after a 40-cycle wear test. Twenty minutes here saves a season, and the Shopify DTC quote for it sits at USD 39-220.
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, the figure being USD 39-220 for a 100-piece run.
Rhodium at 0.20 micron minimum on white wholesale Sourcing, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, and at USD 39-220 for 100 pieces that is the number the buyer signs.
Every unit goes into a foam-backed pouch, then the gift box with sleeve, then the outer carton at 100 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, and the Shopify DTC quote for it sits at USD 39-220.
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, on a 100-piece Shopify DTC order at USD 39-220.
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, the figure being USD 39-220 for a 100-piece run.
Send one drawing or one competitor sample with your target landed cost. We answer with a tolerance sheet, a cost breakdown and a production calendar in two business days, which is USD 39-220 on the Shopify DTC schedule.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across wholesale Sourcing and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, quoted at USD 39-220 per piece in gift box with sleeve.
Related reading: Wholesale Sourcing Bridal Boutique: How the Second Order Becomes Cheaper - HOLYCOME Certification Explained Vermeil Upgrade: Alloy, Karat and the Cost of a Color Change - HOLYCOME
Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.
Contact on WhatsApp service@holycome.comWritten by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.
Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.
Reviewed for accuracy by our quality team before publication. Last updated .