Comparisons

Comparisons Amazon FBA Ready: What a Report Proves and What It Does Not - HOLYCOME

Comparisons Amazon FBA Ready: What a Report Proves and What It Does Not - HOLYCOME

SECTION 01What a Report Proves and What It Does Not

Last February, a US buyer of comparisons placed 200 comparisons against a sample signed in June. The first container landed with 9 pieces that failed on prong geometry alone, and USD 25-80 landed on the buyer's P&L before a single unit sold, the figure being USD 38-210 for a 200-piece run.

The incoming report named prong geometry and the purchase order did not. On a Amazon FBA Ready run that gap between documents is the whole reason a tray fails inspection, certified GRA report and packed retail-ready box with FNSKU label at 200 pieces.

Comparisons wholesale piece from the HOLYCOME line in Wuzhou

We did not touch the retail price. We changed what travels with the retail-ready box with FNSKU label carton, and the Amazon FBA Ready account stopped re-inspecting every tray, shipped as retail-ready box with FNSKU label and certified GRA report.

SECTION 02What US buyers Check Before They Sign

A quote for comparisons usually states carat weight or metal type, and stops there. The four points below are what actually decide whether a run sells through or comes back, certified GRA report and packed retail-ready box with FNSKU label at 200 pieces, shipped as retail-ready box with FNSKU label and certified GRA report.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Stone colour consistencyGraded by eye under D65Colour matched to a retained master stone, per trayRepeat colour complaint in the same SKU
Sizing drift across the runNot measuredGo/no-go gauge on every size, drift held under 0.15 mmResize queue and reship cost
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement

Each line above is a gauge check, not a marketing claim. A factory that cannot state them in numbers is quoting an opinion about comparisons, the figure being USD 38-210 for a 200-piece run.

SECTION 03Where USD 38-210 Per Piece Actually Goes

At USD 38-210 per piece there is no room for hidden cost. The table shows where the money sits and which line a supplier can actually compress.

Comparisons setting and finish detail on a HOLYCOME factory sample
Cost lineShareWhat moves it
Base metal or alloy for comparisons30%Alloy choice and casting yield
Stone or melee for comparisons20%Sieve range and lot batching
Setting and finishing labor for comparisons19%Jig design and bench minutes
Plating, polish and QC for comparisons12%Per-tray versus per-piece checks
Packaging for comparisons19%retail-ready box with FNSKU label

A supplier with no bench minutes per piece has never costed comparisons. Ask for minutes and the reject rule before you ask for a discount, and at USD 38-210 for 200 pieces that is the number the buyer signs.

SECTION 04The Three Failures We See Most in Incoming Samples

prong geometry

A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, which is USD 38-210 on the Amazon FBA Ready schedule.

Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, with GRA report and retail-ready box with FNSKU label stated on the same sheet.

rhodium burn-off

A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, the figure being USD 38-210 for a 200-piece run.

In a 200-piece run this typically shows on 11 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, and the Amazon FBA Ready quote for it sits at USD 38-210.

size-step drift

A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, which is how the Amazon FBA Ready account reads it at USD 38-210.

The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, shipped as retail-ready box with FNSKU label and certified GRA report.

SECTION 05Listing comparisons on Amazon FBA Without a Takedown

Amazon treats jewellery as a category where the packaging is part of the compliance file, not an afterthought. A poly bag with an opening of five inches or more needs the suffocation warning printed on it, and every unit needs an FNSKU label that covers the manufacturer barcode rather than sits beside it, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.

For comparisons the practical constraint is that a unit must survive a bin with other units and still read clean at unboxing. We pack each piece in a foam-backed pouch, then the retail box, then the FNSKU on the outside of the pouch, so a warehouse scan never touches the box the customer sees, and the Amazon FBA Ready quote for it sits at USD 38-210.

Weight and dimension limits decide your freight per unit more than the piece cost does. A single comparison in its retail box normally lands under eight ounces, which keeps it in the small standard tier. Anything above that moves a tier and eats the margin you built into the USD 38-210 quote.

SECTION 06Order Terms, Sample Timing and Packing

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Amazon FBA Ready order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, quoted at USD 38-210 per piece in retail-ready box with FNSKU label.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 38-210 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the retail-ready box with FNSKU label format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, on a 200-piece Amazon FBA Ready order at USD 38-210.

Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, with GRA report and retail-ready box with FNSKU label stated on the same sheet.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 38-210.

SECTION 07How the Second Order Becomes Cheaper

Nobody quotes it for comparisons until something goes wrong, which is exactly why it belongs in the first email, which is how the Amazon FBA Ready account reads it at USD 38-210.

At 200 pieces the arithmetic on comparisons changes: the fixed costs spread, the variable costs do not. That is why the second order prices better than the first even when the gold fix has moved up, priced at USD 38-210 for the 200-piece Amazon FBA Ready run.

We quote both a first-run price and a reorder price for comparisons on the same sheet so the buyer can see where the curve flattens. Most flatten by the third run, with GRA report and retail-ready box with FNSKU label stated on the same sheet.

SECTION 08The Reject Tray Policy That Decides a Partnership

It is not a marketing point on comparisons. It is the number that decides whether the second order happens, and at USD 38-210 for 200 pieces that is the number the buyer signs.

Buyers who get this wrong on comparisons usually get it wrong in the first order and correct it in the second. The cost of that correction is rarely the money; it is the four to six weeks of shelf time lost while a replacement run of comparisons is scheduled behind other orders, priced at USD 38-210 for the 200-piece Amazon FBA Ready run.

Our approach is to write the rule into the comparisons spec sheet before casting, then test it on the first tray. A rule that only exists in an email is not a rule, and a rule that is not tested is a hope, certified GRA report and packed retail-ready box with FNSKU label at 200 pieces.

SECTION 09How a Repeat Order Gets Built

Nothing in this sequence is clever. Each step exists because skipping it produced a specific failure on a previous order of comparisons, which is USD 38-210 on the Amazon FBA Ready schedule.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

Reorders run 12-15 days because the model, the gauge set and the signed spec stay in our system between the Amazon FBA Ready runs, the figure being USD 38-210 for a 200-piece run.

SECTION 10What This Means for a First Order

A first order of 50 pieces per design is a measurement, not a purchase. It shows how stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm behaves on this line and whether the QC sheet matches the carton, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 38-210.

Six weeks of testing is cheaper than a season of returns on comparisons. That is the entire argument for a small first order, which is how the Amazon FBA Ready account reads it at USD 38-210.

SECTION 11Freight, Duty and the Arrival Check

At 200 pieces the carton count drives freight more than the weight. retail-ready box with FNSKU label packs tighter than a display tray and saves a pallet position, on a 200-piece Amazon FBA Ready order at USD 38-210.

FOB Guangzhou or Shenzhen is the default on comparisons. Buyers new to the US market take DDP once and switch after they see the breakdown, priced at USD 38-210 for the 200-piece Amazon FBA Ready run.

If prong geometry shows in the arrival check, the retained tray decides ownership. Keep the GRA report sheet beside the packing list, certified GRA report and packed retail-ready box with FNSKU label at 200 pieces.

SECTION 12Frequently Asked Questions

What is the minimum order for comparisons?

50 pieces per comparison. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.

Do you supply certificates for comparisons?

GRA report on comparisons above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of stone retention after a 40-cycle wear test, which is what a counter or a listing actually needs, with GRA report and retail-ready box with FNSKU label stated on the same sheet.

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if prong geometry shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.

What is the minimum order for comparisons?

50 pieces per comparison. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.

SECTION 13Next Step

Put your current quote beside ours on stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm, plating thickness, dimensional tolerance and the reject rule. The comparison usually settles it quickly, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.

HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, certified GRA report and packed retail-ready box with FNSKU label at 200 pieces.

Related reading: Comparisons Shopify DTC: The Sample Approval That Survives Production - HOLYCOME Care & Cleaning Private Label Carton: Carton Cube, Duty and the Freight Line That Sur - HOLYCOME

E

Editorial Team

Senior editor at HOLYCOME, specializing in gemstone identification, jewelry manufacturing, and wholesale sourcing guides.

Looking for Wholesale Jewelry?

Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.

Contact on WhatsApp service@holycome.com

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .