Comparisons

Comparisons QC and Quality Checklist: custom CAD to sample workflo

Comparisons QC and Quality Checklist: custom CAD to sample workflo

SECTION 011. From CAD to Sample: The First Quality Check

At Holycome we start every custom order with a digital design. Our engineers take your CAD file and translate it into a 3D model that we can inspect for tolerances, wall thickness and stone placement. The first quality checkpoint happens before any physical work begins – we verify that the design matches the spec sheet and that the chosen setting will accommodate the intended stone. This pre‑production audit saves time and prevents costly rework down the line.

Once the design is approved, the production line kicks off. Our in‑house stone cutting and setting teams begin shaping the piece, but the first real physical QC happens after the cutting stage. Incoming stones are weighed, measured and graded against the agreed GRA or IGI certificate, ensuring that only material meeting your standards moves forward.

SECTION 022. In‑Process Checks: Catching Problems Early

During the polishing and finishing stages, we conduct staged inspections to confirm that each component remains within tolerance. This includes checking for scratches, symmetry, and the integrity of the setting. By catching deviations early, we reduce scrap rates and keep lead times tight – typically 12‑18 days from start to finish for custom pieces.

The in‑process checks also cover weight consistency. A slight mismatch in the weight of a ring can indicate an error in the setting or miss‑cut stone. Our technicians re‑measure and re‑polish as needed, so the final product meets the exact specifications before it leaves the factory.

SECTION 033. Pre‑Ship AQL: The Final Gatekeeper

QC Stage Focus Timing Acceptance Criteria
Incoming Stone Check Cut quality, grading Day 1 Matches GRA/IGI data
In‑Process Check Symmetry, weight, polish Mid‑cycle Within ±0.1 mm tolerance
Pre‑Ship AQL Final appearance, packaging Final day Zero defects, compliant packaging

The pre‑ship audit is our final safety net before products leave the factory. Each piece undergoes a visual inspection, a weight check, and a packaging validation. Only when it passes all criteria is it cleared for shipment. This rigorous approach guarantees that every item you receive is flawless.

Our three‑stage QC process is what sets us apart. While many trading companies outsource setting or polishing, we own both lines, giving us tighter control and a first‑pass yield that is about 20% higher than the industry average. This means fewer re‑works and faster delivery to your customers.

SECTION 044. Custom Order Flexibility vs. Stock Availability

Our MOQ for stock items is just one piece, making it easy for resellers to test new designs without a big commitment. For custom orders, the minimum is 30 pieces, which allows us to balance efficiency with personalization. This structure means you can experiment with a single ring for a boutique launch, then scale up once you see demand.

Both options come with the same 12‑18 day production window. For stock, we can ship faster, often within 5‑8 days via DDP to the US. Custom orders follow the same lead time but may take slightly longer due to the design and approval cycle.

SECTION 055. Payment, Shipping and Support

  • Initial deposit: 30% via T/T or PayPal for samples.
  • Remaining balance payable on shipment confirmation.
  • DDP delivery to US and EU in 5‑8 business days.
  • WhatsApp support: +86 133 7744 7107.
  • Email inquiries: service@holycome.com.

We believe a good partnership starts with clear communication. Our proactive updates keep you informed at every QC stage. Whether you’re ordering a single sample or a full run, our goal is to deliver on time, on budget, and with consistent quality.

SECTION 066. Comparing Holycome’s QC with the Marketplace

The jewelry trade is crowded with suppliers that offer generic quality checks. Holycome’s integrated setting and polishing facilities eliminate the hand‑off between contractors, reducing error rates. Our 20% higher first‑pass yield translates into lower unit costs and shorter lead times, giving you a competitive edge.

In addition, our certification options (GRA, IGI) provide an extra layer of confidence for buyers who want traceability. By embedding QC at every stage, we ensure that each piece meets the same high standard, whether you’re buying a single ring or a bulk order.

SECTION 07Frequently Asked Questions

What is the minimum order quantity for custom pieces?

The MOQ for custom orders is 30 pieces, but you can start with 1 piece for stock items. Production time remains 12‑18 days, and pricing is based on volume.

How long does the delivery take to the United States?

We ship via DDP within 5‑8 days after final QC. The MOQ and lead time are not affected by shipping duration.

Do you offer sample testing before full production?

Yes, samples are available for PayPal payment. After the sample is approved, the production run begins, with the same QC standards applied throughout.

Ready to discuss your next project? Contact us for a quote or request samples today.

S

Sarah Lin

GIA Graduate Gemologist (G.G.) with ten years of experience in gem identification and colored-stone grading, having examined over 10,000 stones.

Looking for Wholesale Jewelry?

Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.

Contact on WhatsApp service@holycome.com

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .