Last August, a US buyer of care and Cleaning placed 200 care and Cleaning against a sample signed in January. The first container landed with 9 pieces that failed on tarnish in transit alone, and USD 10-25 landed on the buyer's P&L before a single unit sold, with GRA report and private-label carton with hangtag stated on the same sheet.
On a 200-piece order at USD 9-50, a tarnish in transit rate above two percent is not a quality surprise. It is a costing error that shows up as a credit note three weeks later.
Nothing in the rebuild was expensive. A gauge, a written limit and a retained tray did the work that a discount would only have delayed, which the Private Label Carton file records at USD 9-50 in private-label carton with hangtag.
At USD 9-50 per piece the four measurements below are worth more than the discount being negotiated. One of them costs nothing to write down.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
Write these into the Private Label Carton purchase order and the arrival check becomes arithmetic instead of recollection, priced at USD 9-50 for the 200-piece Private Label Carton run.
Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, and at USD 9-50 for 200 pieces that is the number the buyer signs.
The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin care and Cleaning. Below 0.8 mm of shank width we recommend the hangtag only, with GRA report and private-label carton with hangtag stated on the same sheet.
Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, with GRA report and private-label carton with hangtag stated on the same sheet.
Cost at USD 9-50 leaves no room for assumption. The table shows which line compresses and which line only moves quality down.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for care and Cleaning | 30% | Alloy choice and casting yield |
| Stone or melee for care and Cleaning | 20% | Sieve range and lot batching |
| Setting and finishing labor for care and Cleaning | 19% | Jig design and bench minutes |
| Plating, polish and QC for care and Cleaning | 12% | Per-tray versus per-piece checks |
| Packaging for care and Cleaning | 19% | private-label carton with hangtag |
A factory that cannot state its bench minutes per piece has never costed its own line. Ask for minutes and for the reject rule, not for a discount, shipped as private-label carton with hangtag and certified GRA report, which is USD 9-50 on the Private Label Carton schedule.
A 2.1 g ring shipped at 1.85 g passes a casual check and fails a scale. Publish the weighed average per SKU, which is how the Private Label Carton account reads it at USD 9-50.
In a 200-piece run this typically shows on 14 of pieces. Catching it means measuring silver assay at 92.5% minimum at the tray level, not inspecting the finished carton, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 9-50.
Silver that ships without an anti-tarnish strip browns in a humid container. The strip costs 3 cents and removes the most common arrival complaint, and the Private Label Carton quote for it sits at USD 9-50.
The commercial effect is tarnish claims and replacements, typically USD 4-7 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, the figure being USD 9-50 for a 200-piece run.
A silver surface plated without a palladium strike layer blisters in wear. The strike layer is invisible and essential, the figure being USD 9-50 for a 200-piece run.
Our countermeasure is a gauge and a written limit. It adds about 11 seconds per piece and removes the defect from the run rather than from the carton, and the Private Label Carton quote for it sits at USD 9-50.
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which the Private Label Carton file records at USD 9-50 in private-label carton with hangtag.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 9-50 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, and at USD 9-50 for 200 pieces that is the number the buyer signs.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of silver assay at 92.5% minimum for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is how the Private Label Carton account reads it at USD 9-50.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and the Private Label Carton quote for it sits at USD 9-50.
Ask three suppliers of care and Cleaning this question and you will get three answers. Only one of them survives an inspection, which is how the Private Label Carton account reads it at USD 9-50.
The commercial version of this question for care and Cleaning is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, certified GRA report and packed private-label carton with hangtag at 200 pieces.
That clause matters more than a discount on care and Cleaning. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, and the Private Label Carton quote for it sits at USD 9-50.
On care and Cleaning, the difference between a 40-day order and a 90-day order is usually two signatures, not a factory delay, which the Private Label Carton file records at USD 9-50 in private-label carton with hangtag.
We run this check per tray rather than per carton because the defect that matters on care and Cleaning is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, quoted at USD 9-50 per piece in private-label carton with hangtag.
The report the buyer receives states the count per tray, the measured average and the outlier count for care and Cleaning. It is deliberately unglamorous, and it is the document that settles most disputes before they start, quoted at USD 9-50 per piece in private-label carton with hangtag.
Nothing in this sequence is unusual, and that is the point. Each step exists because skipping it produced a specific failure on a previous order, and at USD 9-50 for 200 pieces that is the number the buyer signs.
Reorders inside this sequence run 12-15 days because the model, the gauge set and the signed spec stay in our system, which is USD 9-50 on the Private Label Carton schedule.
A first Private Label Carton order of 50 pieces per design at USD 9-50 tests the line rather than the range. Three designs covers the shelf.
Ask for the retained tray and the GRA report batch sheet with the first shipment. Both are free and both decide the reorder, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 9-50.
Export runs through Guangzhou or Shenzhen. Air lands in 5-8 days on the US west coast, 7-10 on the east, and sea takes roughly three times the transit, on a 200-piece Private Label Carton order at USD 9-50.
FOB is the default on care and Cleaning and DDP is the option. Buyers new to North American retail usually take DDP once, then switch after they see the breakdown, with GRA report and private-label carton with hangtag stated on the same sheet, priced at USD 9-50 for the 200-piece Private Label Carton run.
If tarnish in transit appears in the arrival check, the retained tray decides who owns it. Keep the GRA report batch sheet in the same folder as the packing list, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 9-50.
50 pieces per care and Cleaning. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, the figure being USD 9-50 for a 200-piece run.
GRA report on care and Cleaning above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of silver assay at 92.5% minimum, which is what a counter or a listing actually needs, priced at USD 9-50 for the 200-piece Private Label Carton run.
We replace or credit inside the same order cycle. The retained reference tray decides: if tarnish in transit shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, with GRA report and private-label carton with hangtag stated on the same sheet.
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, which is how the Private Label Carton account reads it at USD 9-50.
50 pieces per care and Cleaning. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, the figure being USD 9-50 for a 200-piece run.
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070, subject Private Label Carton, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 9-50.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, quoted at USD 9-50 per piece in private-label carton with hangtag.
Related reading: Care & Cleaning Vermeil Upgrade: Alloy, Karat and the Cost of a Color Change - HOLYCOME Care & Cleaning Valentine Program: Sample to Container: The Real Calendar - HOLYCOME
Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.
Contact on WhatsApp service@holycome.comWritten by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.
Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.
Reviewed for accuracy by our quality team before publication. Last updated .