Care & Cleaning

Care & Cleaning Trade Show Sample: What the Quote Actually Covers - HOLYCOME

Care & Cleaning Trade Show Sample: What the Quote Actually Covers - HOLYCOME

SECTION 01Trade Show Sampling for care and Cleaning

A trade show converts on the sample that leaves the booth, not on the catalogue that gets left behind. The sample card has to carry the model number, the metal, the stone size, the FOB price and the MOQ, or the follow-up email starts from zero, certified GRA report and packed display tray with sample card at 100 pieces.

Ten to twelve pieces on a tray is the useful number for care and Cleaning. More than that and the buyer photographs instead of touching, and a photograph is not an order, priced at USD 8-46 for the 100-piece Trade Show Sample run.

Care & Cleaning wholesale piece from the HOLYCOME line in Wuzhou

The follow-up window is seven days. After that the card sits in a stack. We write the quote the same week and put the sample in the post so the buyer has the piece on the desk when the price arrives, certified GRA report and packed display tray with sample card at 100 pieces.

SECTION 02What the Quote Actually Covers

The brief was simple: 100 care and Cleaning, 925 sterling silver with rhodium or e-coat, delivered before November. The run that arrived carried 17 pieces with tarnish in transit, and the buyer spent USD 10-25 on sorting before the goods reached a shelf, quoted at USD 8-46 per piece in display tray with sample card.

Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and tarnish in transit is what a photograph fails to define, and the Trade Show Sample quote for it sits at USD 8-46.

The fix cost about 11 seconds per care and Cleaning and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote, and 100 pieces leaves Wuzhou in display tray with sample card at USD 8-46.

Care & Cleaning setting and finish detail on a HOLYCOME factory sample

SECTION 03What US buyers Check Before They Sign

Four lines decide whether care and Cleaning at USD 8-46 sells through or comes back, and none of them appears on a typical trading-company quote.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Stone colour consistencyGraded by eye under D65Colour matched to a retained master stone, per trayRepeat colour complaint in the same SKU
Sizing drift across the runNot measuredGo/no-go gauge on every size, drift held under 0.15 mmResize queue and reship cost
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement

Put these four into the purchase order and the Trade Show Sample argument after delivery becomes arithmetic, and the Trade Show Sample quote for it sits at USD 8-46.

SECTION 04Where USD 8-46 Per Piece Actually Goes

Cost per piece at USD 8-46 leaves little room for assumption. The table shows which line compresses and which one only moves quality.

Cost lineShareWhat moves it
Base metal or alloy for care and Cleaning30%Alloy choice and casting yield
Stone or melee for care and Cleaning20%Sieve range and lot batching
Setting and finishing labor for care and Cleaning19%Jig design and bench minutes
Plating, polish and QC for care and Cleaning12%Per-tray versus per-piece checks
Packaging for care and Cleaning19%display tray with sample card

A factory with no bench minutes per piece has never costed care and Cleaning at USD 8-46. Ask for minutes and for the reject rule.

SECTION 05What the Quote Actually Covers

Most quotes for care and Cleaning describe the product and skip the part that decides whether the buyer makes money, the figure being USD 8-46 for a 100-piece run.

The commercial version of this question for care and Cleaning is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, which the Trade Show Sample file records at USD 8-46 in display tray with sample card.

That clause matters more than a discount on care and Cleaning. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, with GRA report and display tray with sample card stated on the same sheet.

SECTION 06MOQ, Mixed Designs and the Real First Order

This is the question that separates a trading company from a factory, and on care and Cleaning the answer is usually shorter than buyers expect, and at USD 8-46 for 100 pieces that is the number the buyer signs.

What buyers underestimate on care and Cleaning is the cost of the interruption, not the cost of the piece. A missing 6% of a run stalls a launch, and a stalled launch costs more than the 6% ever did, shipped as display tray with sample card and certified GRA report.

We plan a 3-5% buffer on first runs of care and Cleaning and tell the buyer it exists. Hiding a buffer and shipping it as production is how a supplier trains a buyer to distrust the count, which the Trade Show Sample file records at USD 8-46 in display tray with sample card.

SECTION 07Order Terms, Sample Timing and Packing

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Trade Show Sample order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and the Trade Show Sample quote for it sits at USD 8-46.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 8-46 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the display tray with sample card format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, shipped as display tray with sample card and certified GRA report.

Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of silver assay at 92.5% minimum for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and the Trade Show Sample quote for it sits at USD 8-46.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, with GRA report and display tray with sample card stated on the same sheet.

SECTION 08The Three Failures We See Most in Incoming Samples

rhodium adhesion

A silver surface plated without a palladium strike layer blisters in wear. The strike layer is invisible and essential, quoted at USD 8-46 per piece in display tray with sample card.

In a 100-piece run this typically shows on 11 of pieces. Catching it means measuring silver assay at 92.5% minimum at the tray level, not inspecting the finished carton, which the Trade Show Sample file records at USD 8-46 in display tray with sample card.

weight shortfall

A 2.1 g ring shipped at 1.85 g passes a casual check and fails a scale. Publish the weighed average per SKU, and the Trade Show Sample quote for it sits at USD 8-46.

The commercial effect is tarnish claims and replacements, typically USD 4-7 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, quoted at USD 8-46 per piece in display tray with sample card.

tarnish in transit

Silver that ships without an anti-tarnish strip browns in a humid container. The strip costs 3 cents and removes the most common arrival complaint, with GRA report and display tray with sample card stated on the same sheet.

Our countermeasure is a gauge and a written limit. It adds about 11 seconds per piece and removes the defect from the run rather than from the carton, with GRA report and display tray with sample card stated on the same sheet.

SECTION 09What This Means for a First Order

A first Trade Show Sample order of 50 pieces per design at USD 8-46 is a test of the line, not a commitment to the range.

Ask for the retained tray and the batch report with the first shipment. Both are free and both decide the second order, priced at USD 8-46 for the 100-piece Trade Show Sample run.

SECTION 10How a Repeat Order Gets Built

The sequence below is fixed for a Trade Show Sample run. The dates move with the stone lot, not with the shipping season, shipped as display tray with sample card and certified GRA report.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

Reorders inside this sequence run 12-15 days, because the model and the gauge set stay here after the Trade Show Sample shipment, quoted at USD 8-46 per piece in display tray with sample card.

SECTION 11Freight, Duty and the Arrival Check

Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east, and at USD 8-46 for 100 pieces that is the number the buyer signs.

For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge, which is USD 8-46 on the Trade Show Sample schedule.

Check the count, the weight and silver assay at 92.5% minimum and plating adhesion after a 24-hour humidity test before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns, on a 100-piece Trade Show Sample order at USD 8-46.

SECTION 12Frequently Asked Questions

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if tarnish in transit shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, which is USD 8-46 on the Trade Show Sample schedule.

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, and the Trade Show Sample quote for it sits at USD 8-46.

What is the minimum order for care and Cleaning?

50 pieces per care and Cleaning. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, quoted at USD 8-46 per piece in display tray with sample card.

Do you supply certificates for care and Cleaning?

GRA report on care and Cleaning above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of silver assay at 92.5% minimum, which is what a counter or a listing actually needs, on a 100-piece Trade Show Sample order at USD 8-46.

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if tarnish in transit shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, which is USD 8-46 on the Trade Show Sample schedule.

SECTION 13Next Step

The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070 and mark it Trade Show Sample, which is USD 8-46 on the Trade Show Sample schedule.

HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, which is how the Trade Show Sample account reads it at USD 8-46.

Related reading: Care & Cleaning Q4 Holiday Stock: MOQ, Mixed Designs and the Real First Order - HOLYCOME Sizing Guide Bridal Boutique: How the Second Order Becomes Cheaper - HOLYCOME

E

Editorial Team

Senior editor at HOLYCOME, specializing in gemstone identification, jewelry manufacturing, and wholesale sourcing guides.

Looking for Wholesale Jewelry?

Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.

Contact on WhatsApp service@holycome.com

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .