A US buyer of care and Cleaning came to us after 800 care and Cleaning from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: tarnish in transit had drifted far enough that the buyer's own bench could not correct it without recutting, quoted at USD 7-39 per piece in bulk carton, 50 per bag.
That rejection was avoidable at the drawing stage. Tarnish in transit belongs on the spec sheet next to the stone size, not in the claim email three weeks after arrival, with SGS batch report and bulk carton, 50 per bag stated on the same sheet, on a 800-piece Distributor Tier order at USD 7-39.
We kept the Distributor Tier price and changed the four measurements that matter. The rebuild cost about 11 seconds per piece and removed the whole claim conversation, on a 800-piece Distributor Tier order at USD 7-39.
At USD 7-39 per piece for care and Cleaning, the stone sits near a quarter and the labor line moves by double digits between two quotes for one drawing.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for care and Cleaning | 32% | Alloy choice and casting yield |
| Stone or melee for care and Cleaning | 23% | Sieve range and lot batching |
| Setting and finishing labor for care and Cleaning | 21% | Jig design and bench minutes |
| Plating, polish and QC for care and Cleaning | 14% | Per-tray versus per-piece checks |
| Packaging for care and Cleaning | 10% | bulk carton, 50 per bag |
The saving in the cheapest quote hides in plating and stone grade. At 800 pieces that saving is visible in season two, shipped as bulk carton, 50 per bag and certified SGS batch report.
The Distributor Tier buyer signs on four numbers. The table puts the trade default beside our standard so the difference is visible before the deposit, which is USD 7-39 on the Distributor Tier schedule.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
None of the four adds cost at USD 7-39. They add about 11 seconds per piece and remove the reason to inspect twice.
A distributor does not buy a care and Cleaning, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 7-39.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, which is how the Distributor Tier account reads it at USD 7-39.
Turn is the number the distributor manages. At USD 7-39 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of care and Cleaning move in 800-piece lots rather than in the 50-piece sample quantity.
Silver that ships without an anti-tarnish strip browns in a humid container. The strip costs 3 cents and removes the most common arrival complaint, which is USD 7-39 on the Distributor Tier schedule.
In a 800-piece run this typically shows on 11 of pieces. Catching it means measuring silver assay at 92.5% minimum at the tray level, not inspecting the finished carton, on a 800-piece Distributor Tier order at USD 7-39.
A silver surface plated without a palladium strike layer blisters in wear. The strike layer is invisible and essential, which is how the Distributor Tier account reads it at USD 7-39.
The commercial effect is tarnish claims and replacements, typically USD 4-7 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is how the Distributor Tier account reads it at USD 7-39.
A 2.1 g ring shipped at 1.85 g passes a casual check and fails a scale. Publish the weighed average per SKU, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Our countermeasure is a gauge and a written limit. It adds about 11 seconds per piece and removes the defect from the run rather than from the carton, which is USD 7-39 on the Distributor Tier schedule.
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 7-39 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, and at USD 7-39 for 800 pieces that is the number the buyer signs.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of silver assay at 92.5% minimum for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, shipped as bulk carton, 50 per bag and certified SGS batch report.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which is USD 7-39 on the Distributor Tier schedule.
The number is less interesting than the rule behind it, and care and Cleaning is where that rule gets tested, and at USD 7-39 for 800 pieces that is the number the buyer signs.
One practical note on timing for care and Cleaning: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, which is how the Distributor Tier account reads it at USD 7-39.
We date the care and Cleaning proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, quoted at USD 7-39 per piece in bulk carton, 50 per bag.
Ask three suppliers of care and Cleaning this question and you will get three answers. Only one of them survives an inspection, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
In the US market terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For care and Cleaning, we publish the figure per SKU and hold it for the order window rather than for the calendar year, which the Distributor Tier file records at USD 7-39 in bulk carton, 50 per bag.
Practically, it shows up in three places for care and Cleaning: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, and at USD 7-39 for 800 pieces that is the number the buyer signs.
Nothing in this sequence is clever. Each step exists because skipping it cost somebody a claim on care and Cleaning at USD 7-39.
MOQ is 50 pieces per design, low enough to test a category and high enough to keep the casting line accountable, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces, and the Distributor Tier quote for it sits at USD 7-39.
Sea freight costs roughly a third of air and takes three times the transit, which only makes sense for an SKU already selling in the US market, the figure being USD 7-39 for a 800-piece run.
FOB is the default and DDP is the option. Buyers new to the US market usually take DDP once and then switch after they see the breakdown, shipped as bulk carton, 50 per bag and certified SGS batch report, on a 800-piece Distributor Tier order at USD 7-39.
At receiving, count cartons, weigh one tray and measure ten pieces against silver assay at 92.5% minimum. Twenty minutes here saves a season of returns, and at USD 7-39 for 800 pieces that is the number the buyer signs.
Start with three designs at 50 pieces each. That covers the 800 pieces you need to read sell-through without betting on one model, on a 800-piece Distributor Tier order at USD 7-39.
Sample 3-5 days, bulk 15-20 days under 500 pieces, 800 pieces inside that window. The calendar is the same on every Distributor Tier run, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Rhodium at 0.20 micron minimum on white care and Cleaning, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, shipped as bulk carton, 50 per bag and certified SGS batch report.
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, priced at USD 7-39 for the 800-piece Distributor Tier run.
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and at USD 7-39 for 800 pieces that is the number the buyer signs.
Rhodium at 0.20 micron minimum on white care and Cleaning, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
If the USD 7-39 band fits the shelf, send a drawing and we quote the 800-piece Distributor Tier run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across care and Cleaning and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, which is USD 7-39 on the Distributor Tier schedule.
Related reading: Care & Cleaning Trade Show Sample: What the Quote Actually Covers - HOLYCOME Sizing Guide Shopify DTC: The Sample Approval That Survives Production - HOLYCOME
Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.
Contact on WhatsApp service@holycome.comWritten by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.
Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.
Reviewed for accuracy by our quality team before publication. Last updated .