A US buyer of sizing Guide came to us after 50 sizing Guide from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: prong geometry had drifted far enough that the buyer's own bench could not correct it without recutting, which the Bridal Boutique file records at USD 43-241 in two-piece bridal box.
That rejection was avoidable at the drawing stage. Prong geometry belongs on the spec sheet next to the stone size, not in the claim email three weeks after arrival, and at USD 43-241 for 50 pieces that is the number the buyer signs.
We kept the Bridal Boutique price and changed the four measurements that matter. The rebuild cost about 22 seconds per piece and removed the whole claim conversation, which the Bridal Boutique file records at USD 43-241 in two-piece bridal box.
The Bridal Boutique buyer signs on four numbers. The table puts the trade default beside our standard so the difference is visible before the deposit, priced at USD 43-241 for the 50-piece Bridal Boutique run.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
| Plating thickness | Nominal only | 0.20 micron rhodium logged per lot, 3 microns on vermeil | Wear-through inside one season |
| Surface porosity after polish | Seen after plating | Cast porosity checked before plating, rejects pulled at that stage | Plating blister six weeks later |
None of the four adds cost at USD 43-241. They add about 22 seconds per piece and remove the reason to inspect twice.
A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, shipped as two-piece bridal box and certified IGI report.
Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, which the Bridal Boutique file records at USD 43-241 in two-piece bridal box.
A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, and 50 pieces leaves Wuzhou in two-piece bridal box at USD 43-241.
In a 50-piece run this typically shows on 14 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, with IGI report and two-piece bridal box stated on the same sheet.
A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, with IGI report and two-piece bridal box stated on the same sheet.
The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, priced at USD 43-241 for the 50-piece Bridal Boutique run.
At USD 43-241 per piece for sizing Guide, the stone sits near a quarter and the labor line moves by double digits between two quotes for one drawing.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for sizing Guide | 32% | Alloy choice and casting yield |
| Stone or melee for sizing Guide | 23% | Sieve range and lot batching |
| Setting and finishing labor for sizing Guide | 21% | Jig design and bench minutes |
| Plating, polish and QC for sizing Guide | 14% | Per-tray versus per-piece checks |
| Packaging for sizing Guide | 10% | two-piece bridal box |
The saving in the cheapest quote hides in plating and stone grade. At 50 pieces that saving is visible in season two, with IGI report and two-piece bridal box stated on the same sheet.
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Bridal Boutique order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which is USD 43-241 on the Bridal Boutique schedule.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 43-241 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the two-piece bridal box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, and the Bridal Boutique quote for it sits at USD 43-241.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, with IGI report and two-piece bridal box stated on the same sheet.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, the figure being USD 43-241 for a 50-piece run.
A bridal account buys a sample tray first and stock later. The tray has to cover the sizes the boutique actually fits, which in practice means one sample in each half size from five to eight, so eight pieces per design rather than one, and at USD 43-241 for 50 pieces that is the number the buyer signs.
Consignment terms change what you order. A boutique that takes sizing Guide on consignment wants a marked retail price on the tag, an exchange window, and a certificate in the box the bride can photograph. We supply the IGI report in a card sleeve for exactly that reason, and 50 pieces leaves Wuzhou in two-piece bridal box at USD 43-241.
The calendar matters more than the price. Brides buy between January and April for a summer wedding, so the tray has to be on the counter by December. A March order arrives after the decision has already been made, shipped as two-piece bridal box and certified IGI report.
Buyers ask it in the first call about sizing Guide and rarely get a number they can put in a spreadsheet, shipped as two-piece bridal box and certified IGI report.
The buyers who get the most out of sizing Guide treat the first order as a measurement, not as a purchase. They buy a small run, measure the four numbers that matter, and then commit, which the Bridal Boutique file records at USD 43-241 in two-piece bridal box.
We support it directly on sizing Guide: a 50-piece test run per design, the same gauge standard as a bulk order, and the same retained tray. Small does not have to mean loose, the figure being USD 43-241 for a 50-piece run.
The answer for sizing Guide depends on four variables, and three of them are under the buyer's control, and at USD 43-241 for 50 pieces that is the number the buyer signs.
What buyers underestimate on sizing Guide is the cost of the interruption, not the cost of the piece. A missing 6% of a run stalls a launch, and a stalled launch costs more than the 6% ever did, which the Bridal Boutique file records at USD 43-241 in two-piece bridal box.
We plan a 3-5% buffer on first runs of sizing Guide and tell the buyer it exists. Hiding a buffer and shipping it as production is how a supplier trains a buyer to distrust the count, which is how the Bridal Boutique account reads it at USD 43-241.
Sea freight costs roughly a third of air and takes three times the transit, which only makes sense for an SKU already selling in US wholesale, which the Bridal Boutique file records at USD 43-241 in two-piece bridal box.
FOB is the default and DDP is the option. Buyers new to US wholesale usually take DDP once and then switch after they see the breakdown, quoted at USD 43-241 per piece in two-piece bridal box.
At receiving, count cartons, weigh one tray and measure ten pieces against stone retention after a 40-cycle wear test. Twenty minutes here saves a season of returns, certified IGI report and packed two-piece bridal box at 50 pieces, certified IGI report and packed two-piece bridal box at 50 pieces.
Nothing in this sequence is clever. Each step exists because skipping it cost somebody a claim on sizing Guide at USD 43-241.
MOQ is 50 pieces per design, low enough to test a category and high enough to keep the casting line accountable, which is how the Bridal Boutique account reads it at USD 43-241.
Start with three designs at 50 pieces each. That covers the 50 pieces you need to read sell-through without betting on one model, the figure being USD 43-241 for a 50-piece run.
Sample 3-5 days, bulk 15-20 days under 500 pieces, 50 pieces inside that window. The calendar is the same on every Bridal Boutique run, and 50 pieces leaves Wuzhou in two-piece bridal box at USD 43-241.
IGI report on sizing Guide above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of stone retention after a 40-cycle wear test, which is what a counter or a listing actually needs, which is USD 43-241 on the Bridal Boutique schedule.
We replace or credit inside the same order cycle. The retained reference tray decides: if prong geometry shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, and at USD 43-241 for 50 pieces that is the number the buyer signs.
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, and at USD 43-241 for 50 pieces that is the number the buyer signs.
50 pieces per sizing Guide. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which is how the Bridal Boutique account reads it at USD 43-241.
IGI report on sizing Guide above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of stone retention after a 40-cycle wear test, which is what a counter or a listing actually needs, which is USD 43-241 on the Bridal Boutique schedule.
If the USD 43-241 band fits the shelf, send a drawing and we quote the 50-piece Bridal Boutique run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across sizing Guide and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, priced at USD 43-241 for the 50-piece Bridal Boutique run.
Related reading: Sizing Guide Distributor Tier: The Reject Tray Policy That Decides a Partnership - HOLYCOME Industry Insights Amazon FBA Ready: What a Report Proves and What It Does Not - HOLYCOME
Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.
Contact on WhatsApp service@holycome.comWritten by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.
Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.
Reviewed for accuracy by our quality team before publication. Last updated .