Wholesale Sourcing

Wholesale Sourcing Supplier: How the Second Order Becomes Cheaper - HOLYCOME

Wholesale Sourcing Supplier: How the Second Order Becomes Cheaper - HOLYCOME

SECTION 01How the Second Order Becomes Cheaper

A US independent jewelers and Shopify sellers came to us after 180 wholesale Sourcing from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: prong geometry had drifted far enough that the buyer's own bench could not correct it without recutting.

That rejection was avoidable at the drawing stage. prong geometry belongs on the spec sheet next to the stone size, not in the claim email three weeks after arrival. For wholesale Sourcing in this band the rule is the same on every tray of the run, not only on the first.

Wholesale Sourcing wholesale product photo from the HOLYCOME line in Wuzhou

Our rebuild kept the buyer's retail price and changed four numbers on the bench. The next run cleared inspection because the specification traveled with the tray, not with a phone call. For wholesale Sourcing in this band the rule is the same on every tray of the run, not only on the first.

SECTION 02What American buyers Check Before They Sign

Most quotes describe the wholesale Sourcing and skip the part that determines the buyer's margin. Those four lines are listed below with the trade default beside our standard. For wholesale Sourcing in this band the rule is the same on every tray of the run, not only on the first.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Prong Geometry on wholesale SourcingInspected visually at the trayGauntlet check on every piece, limit written in the specReturns inside 60 days of wear
Rhodium Burn Off on wholesale SourcingBatch dependent, not loggedThickness and tension logged per lotComplaint after the second season
Size Step Drift on wholesale SourcingEstimated from nominalGauged per size with go/no-go toolsResize queue and reship cost
Tolerance stack-up on wholesale SourcingQuote states nominal onlyWorst-case band published per SKUFreight and duty drift

Write these four into the purchase order and the argument after delivery becomes arithmetic rather than recollection. For wholesale Sourcing in this band the rule is the same on every tray of the run, not only on the first.

SECTION 03Where USD 38-210 Per Piece Actually Goes

Buyers assume the stone dominates the cost of a wholesale Sourcing. At wholesale it is closer to a quarter, and the labor line is where two quotes for the same drawing diverge by double digits. For wholesale Sourcing in this band the rule is the same on every tray of the run, not only on the first.

Wholesale Sourcing close-up of setting and finish, HOLYCOME factory sample
Cost lineShareWhat moves it
Base metal or alloy for wholesale Sourcing32%Alloy choice and casting yield
Stone or melee for wholesale Sourcing23%Sieve range and lot batching
Setting and finishing labor for wholesale Sourcing21%Jig design and bench minutes
Plating, polish and QC for wholesale Sourcing14%Per-tray versus per-piece checks
Packaging and freight for wholesale Sourcing10%Box grade and DDP versus FOB

The cheapest quote for wholesale Sourcing usually hides its saving in the plating line and the stone grade. Both show up in the second season, not the first. For wholesale Sourcing in this band the rule is the same on every tray of the run, not only on the first.

SECTION 04The Three Failures We See Most in Incoming Samples

prong geometry

A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close.

The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return.

rhodium burn-off

A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters.

Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton.

size-step drift

A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch.

In a 180-piece run this typically shows on 17 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton.

SECTION 05How the Second Order Becomes Cheaper

On wholesale Sourcing, the difference between a 40-day order and a 90-day order is usually two signatures, not a factory delay.

Three numbers decide it for rings: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent.

We send a one-page sheet with every wholesale Sourcing quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing.

SECTION 06How a Repeat Order Gets Built

The calendar below is what we quote on a 180-piece run of wholesale Sourcing. It starts when the spec is signed, not when the deposit clears. For wholesale Sourcing in this band the rule is the same on every tray of the run, not only on the first.

  1. Spec sheet signed before casting: lost-wax cast, tolerances, plating thickness and packing format.
  2. Sample in 3-5 working days from stock components, or about 20 days if a new model is required.
  3. Production photos at three checkpoints: raw cast, post-polish, post-set, with buyer approval at each.
  4. Bulk in 15-20 days under 500 pieces; custom tooling runs 25-30 days.
  5. Pre-shipment QC report with per-tray counts and a retained reference tray for disputes.

MOQ is 50 pieces per design, low enough to test a category and high enough to keep the casting line accountable. For wholesale Sourcing in this band the rule is the same on every tray of the run, not only on the first.

SECTION 07What the Quote Actually Covers

On wholesale Sourcing, the cheapest answer is rarely the cheapest outcome once the second season is counted.

At 180 pieces the arithmetic on rings changes: the fixed costs spread, the variable costs do not. That is why the second order prices better than the first even when the gold fix has moved up.

We quote both a first-run price and a reorder price for wholesale Sourcing on the same sheet so the buyer can see where the curve flattens. Most flatten by the third run.

SECTION 08Sample to Container: The Real Calendar

Most quotes for wholesale Sourcing describe the product and skip the part that decides whether the buyer makes money.

One practical note on timing for rings: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five.

We date the wholesale Sourcing proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet.

SECTION 09Alloy, Karat and the Cost of a Color Change

The answer for wholesale Sourcing depends on four variables, and three of them are under the buyer's control.

We run this check per tray rather than per carton because the defect that matters on rings is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it.

The report the buyer receives states the count per tray, the measured average and the outlier count for wholesale Sourcing. It is deliberately unglamorous, and it is the document that settles most disputes before they start.

SECTION 10What This Means for a First Order

The point of a small first run is not the margin. It is finding out whether the supplier's paperwork survives contact with the actual goods. For wholesale Sourcing in this band the rule is the same on every tray of the run, not only on the first.

The first order is the cheapest inspection a buyer will ever run, because the volume is small enough to check every tray by hand. For wholesale Sourcing in this band the rule is the same on every tray of the run, not only on the first.

SECTION 11Freight, Duty and the Arrival Check

Sea freight costs roughly a third of air and takes three times the transit, which only makes sense for an SKU already selling in the American bridal market. For wholesale Sourcing in this band the rule is the same on every tray of the run, not only on the first.

FOB is the default and DDP is the option. Buyers new to the American bridal market usually take DDP once and then switch after they see the breakdown. For wholesale Sourcing in this band the rule is the same on every tray of the run, not only on the first.

The arrival check is three steps: count cartons against the packing list, weigh a sample tray, and measure ten pieces against stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm. For wholesale Sourcing in this band the rule is the same on every tray of the run, not only on the first.

SECTION 12Frequently Asked Questions

What is the minimum order for wholesale Sourcing?

50 pieces per wholesale Sourcing. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 we cannot keep the gauge check independent of the shift, which is the part buyers actually pay for on wholesale Sourcing.

How long does a reorder of the same wholesale Sourcing take?

12-15 days for wholesale Sourcing, because the model, the gauge set and the signed spec stay in our system. A first run is longer: 3-5 days for a stock-component sample, about 20 days if a new model is needed, then 15-20 days for bulk under 500 pieces.

Do you supply certificates for wholesale Sourcing?

IGI or GRA above 0.50 ct for wholesale Sourcing. Below that threshold we supply a batch report plus per-piece measurement of stone retention after a 40-cycle wear test, which is what most resellers need at the counter.

What finish do you use on wholesale Sourcing, and how thick is it?

Rhodium at 0.20 micron minimum on white wholesale Sourcing, with a palladium strike layer so wear-through reads white rather than yellow. Thickness is logged per lot and appears on the QC sheet, not only in the brochure.

How do you handle a rejected tray of wholesale Sourcing?

We replace or credit inside the same order cycle. The retained reference tray decides: if prong geometry shows on our retained wholesale Sourcing we own it, and if it appeared in transit we split the assay cost and file with the carrier. A typical exposure on wholesale Sourcing is a return shipment plus a resize labor claim, typically USD 9-14 per piece.

SECTION 13Next Step

Send one drawing or one competitor sample with your target landed cost. We answer with a tolerance sheet, a cost breakdown and a production calendar in two business days. For wholesale Sourcing in this band the rule is the same on every tray of the run, not only on the first.

HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across wholesale Sourcing and adjacent categories. service@holycome.com or WhatsApp +86 18078079070.

Related reading: Certification Explained Supplier: The Reject Tray Policy That Decides a Partnership - HOLYCOME Buying Guides Supplier: Sample to Container: The Real Calendar - HOLYCOME

E

Editorial Team

Senior editor at HOLYCOME, specializing in gemstone identification, jewelry manufacturing, and wholesale sourcing guides.

Looking for Wholesale Jewelry?

Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.

Contact on WhatsApp service@holycome.com

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .