The brief was simple: 50 wholesale Sourcing, 925 sterling silver, delivered before August. The run that arrived carried 17 pieces with prong geometry, and the buyer spent USD 30-90 on sorting before the goods reached a shelf, which is USD 47-262 on the Made to Order schedule.
On a 50-piece order at USD 47-262, a prong geometry rate above two percent is not a quality surprise. It is a costing error that shows up as a credit note three weeks later.
Nothing in the rebuild was expensive. A gauge, a written limit and a retained tray did the work that a discount would only have delayed, and 50 pieces leaves Wuzhou in single-piece foam box at USD 47-262.
Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, certified IGI report and packed single-piece foam box at 50 pieces.
Twenty days is realistic for a new wholesale Sourcing when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, the figure being USD 47-262 for a 50-piece run.
The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, shipped as single-piece foam box and certified IGI report.

A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, which the Made to Order file records at USD 47-262 in single-piece foam box.
In a 50-piece run this typically shows on 17 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, on a 50-piece Made to Order order at USD 47-262.
A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, priced at USD 47-262 for the 50-piece Made to Order run.
The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, quoted at USD 47-262 per piece in single-piece foam box.
A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, the figure being USD 47-262 for a 50-piece run.
Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, and at USD 47-262 for 50 pieces that is the number the buyer signs.
At USD 47-262 per piece the four measurements below are worth more than the discount being negotiated. One of them costs nothing to write down.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Write these into the Made to Order purchase order and the arrival check becomes arithmetic instead of recollection, the figure being USD 47-262 for a 50-piece run.
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and at USD 47-262 for 50 pieces that is the number the buyer signs.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 47-262 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, quoted at USD 47-262 per piece in single-piece foam box.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which the Made to Order file records at USD 47-262 in single-piece foam box.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, with IGI report and single-piece foam box stated on the same sheet.
Cost at USD 47-262 leaves no room for assumption. The table shows which line compresses and which line only moves quality down.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for wholesale Sourcing | 30% | Alloy choice and casting yield |
| Stone or melee for wholesale Sourcing | 20% | Sieve range and lot batching |
| Setting and finishing labor for wholesale Sourcing | 19% | Jig design and bench minutes |
| Plating, polish and QC for wholesale Sourcing | 12% | Per-tray versus per-piece checks |
| Packaging for wholesale Sourcing | 19% | single-piece foam box |
A factory that cannot state its bench minutes per piece has never costed its own line. Ask for minutes and for the reject rule, not for a discount, certified IGI report and packed single-piece foam box at 50 pieces, certified IGI report and packed single-piece foam box at 50 pieces.
On wholesale Sourcing, the difference between a 40-day order and a 90-day order is usually two signatures, not a factory delay, quoted at USD 47-262 per piece in single-piece foam box.
Three numbers decide it for wholesale Sourcing: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, which is USD 47-262 on the Made to Order schedule.
We send a one-page sheet with every wholesale Sourcing quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, and the Made to Order quote for it sits at USD 47-262.
Buyers in US wholesale tend to over-index on unit price for wholesale Sourcing and under-index on what happens after delivery, quoted at USD 47-262 per piece in single-piece foam box.
There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on wholesale Sourcing and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, the figure being USD 47-262 for a 50-piece run.
We would rather lose a first order of wholesale Sourcing on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, shipped as single-piece foam box and certified IGI report.
A first Made to Order order of 50 pieces per design at USD 47-262 tests the line rather than the range. Three designs covers the shelf.
Ask for the retained tray and the IGI report batch sheet with the first shipment. Both are free and both decide the reorder, which the Made to Order file records at USD 47-262 in single-piece foam box.
Export runs through Guangzhou or Shenzhen. Air lands in 5-8 days on the US west coast, 7-10 on the east, and sea takes roughly three times the transit, and at USD 47-262 for 50 pieces that is the number the buyer signs.
FOB is the default on wholesale Sourcing and DDP is the option. Buyers new to US wholesale usually take DDP once, then switch after they see the breakdown, which is USD 47-262 on the Made to Order schedule.
If prong geometry appears in the arrival check, the retained tray decides who owns it. Keep the IGI report batch sheet in the same folder as the packing list, and 50 pieces leaves Wuzhou in single-piece foam box at USD 47-262.
Nothing in this sequence is unusual, and that is the point. Each step exists because skipping it produced a specific failure on a previous order, the figure being USD 47-262 for a 50-piece run.
Reorders inside this sequence run 12-15 days because the model, the gauge set and the signed spec stay in our system, shipped as single-piece foam box and certified IGI report, which the Made to Order file records at USD 47-262 in single-piece foam box.
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and 50 pieces leaves Wuzhou in single-piece foam box at USD 47-262.
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, on a 50-piece Made to Order order at USD 47-262.
Rhodium at 0.20 micron minimum on white wholesale Sourcing, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, priced at USD 47-262 for the 50-piece Made to Order run.
Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, certified IGI report and packed single-piece foam box at 50 pieces.
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and 50 pieces leaves Wuzhou in single-piece foam box at USD 47-262.
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070, subject Made to Order, and the Made to Order quote for it sits at USD 47-262.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, which is how the Made to Order account reads it at USD 47-262.
Related reading: Certification Explained Private Label Carton: Carton Cube, Duty and the Freight Line - HOLYCOME Certification Explained Q4 Holiday Stock: MOQ, Mixed Designs and the Real First Order - HOLYCOME
Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.
Contact on WhatsApp service@holycome.comWritten by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.
Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.
Reviewed for accuracy by our quality team before publication. Last updated .