A US buyer of trends and Styles came to us after 50 trends and Styles from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: prong geometry had drifted far enough that the buyer's own bench could not correct it without recutting, and the Made to Order quote for it sits at USD 47-262.
That rejection was avoidable at the drawing stage. Prong geometry belongs on the spec sheet next to the stone size, not in the claim email three weeks after arrival, with IGI report and single-piece foam box stated on the same sheet, on a 50-piece Made to Order order at USD 47-262.
We kept the Made to Order price and changed the four measurements that matter. The rebuild cost about 22 seconds per piece and removed the whole claim conversation, and at USD 47-262 for 50 pieces that is the number the buyer signs.
Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, which the Made to Order file records at USD 47-262 in single-piece foam box.
Twenty days is realistic for a new trends and Style when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, and the Made to Order quote for it sits at USD 47-262.
The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, certified IGI report and packed single-piece foam box at 50 pieces.

A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, and 50 pieces leaves Wuzhou in single-piece foam box at USD 47-262.
The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is how the Made to Order account reads it at USD 47-262.
A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, on a 50-piece Made to Order order at USD 47-262.
Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, the figure being USD 47-262 for a 50-piece run.
A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, quoted at USD 47-262 per piece in single-piece foam box.
In a 50-piece run this typically shows on 17 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, and at USD 47-262 for 50 pieces that is the number the buyer signs.
The Made to Order buyer signs on four numbers. The table puts the trade default beside our standard so the difference is visible before the deposit, which the Made to Order file records at USD 47-262 in single-piece foam box.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
None of the four adds cost at USD 47-262. They add about 22 seconds per piece and remove the reason to inspect twice.
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, the figure being USD 47-262 for a 50-piece run.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 47-262 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is how the Made to Order account reads it at USD 47-262.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and 50 pieces leaves Wuzhou in single-piece foam box at USD 47-262.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which is USD 47-262 on the Made to Order schedule.
At USD 47-262 per piece for trends and Styles, the stone sits near a quarter and the labor line moves by double digits between two quotes for one drawing.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for trends and Styles | 32% | Alloy choice and casting yield |
| Stone or melee for trends and Styles | 23% | Sieve range and lot batching |
| Setting and finishing labor for trends and Styles | 21% | Jig design and bench minutes |
| Plating, polish and QC for trends and Styles | 14% | Per-tray versus per-piece checks |
| Packaging for trends and Styles | 10% | single-piece foam box |
The saving in the cheapest quote hides in plating and stone grade. At 50 pieces that saving is visible in season two, and 50 pieces leaves Wuzhou in single-piece foam box at USD 47-262.
A buyer who understands this about trends and Styles negotiates differently, and usually negotiates less, which is USD 47-262 on the Made to Order schedule.
Three numbers decide it for trends and Styles: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, which is USD 47-262 on the Made to Order schedule.
We send a one-page sheet with every trends and Styles quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, certified IGI report and packed single-piece foam box at 50 pieces.
For trends and Styles at this price band, the honest answer is a range rather than a point, and the range has a reason, the figure being USD 47-262 for a 50-piece run.
There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on trends and Styles and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, the figure being USD 47-262 for a 50-piece run.
We would rather lose a first order of trends and Styles on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, which is USD 47-262 on the Made to Order schedule.
Start with three designs at 50 pieces each. That covers the 50 pieces you need to read sell-through without betting on one model, which is USD 47-262 on the Made to Order schedule.
Sample 3-5 days, bulk 15-20 days under 500 pieces, 50 pieces inside that window. The calendar is the same on every Made to Order run, with IGI report and single-piece foam box stated on the same sheet.
Sea freight costs roughly a third of air and takes three times the transit, which only makes sense for an SKU already selling in the American bridal market, the figure being USD 47-262 for a 50-piece run.
FOB is the default and DDP is the option. Buyers new to the American bridal market usually take DDP once and then switch after they see the breakdown, shipped as single-piece foam box and certified IGI report, with IGI report and single-piece foam box stated on the same sheet.
At receiving, count cartons, weigh one tray and measure ten pieces against stone retention after a 40-cycle wear test. Twenty minutes here saves a season of returns, and at USD 47-262 for 50 pieces that is the number the buyer signs.
Nothing in this sequence is clever. Each step exists because skipping it cost somebody a claim on trends and Styles at USD 47-262.
MOQ is 50 pieces per design, low enough to test a category and high enough to keep the casting line accountable, certified IGI report and packed single-piece foam box at 50 pieces, the figure being USD 47-262 for a 50-piece run.
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, priced at USD 47-262 for the 50-piece Made to Order run.
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and at USD 47-262 for 50 pieces that is the number the buyer signs.
Rhodium at 0.20 micron minimum on white trends and Styles, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which the Made to Order file records at USD 47-262 in single-piece foam box.
Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, which the Made to Order file records at USD 47-262 in single-piece foam box.
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, priced at USD 47-262 for the 50-piece Made to Order run.
If the USD 47-262 band fits the shelf, send a drawing and we quote the 50-piece Made to Order run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across trends and Styles and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, certified IGI report and packed single-piece foam box at 50 pieces.
Related reading: Wholesale Sourcing Private Label Carton: Carton Cube, Duty and the Freight Line That - HOLYCOME Wholesale Sourcing Q4 Holiday Stock: MOQ, Mixed Designs and the Real First Order - HOLYCOME
Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.
Contact on WhatsApp service@holycome.comWritten by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.
Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.
Reviewed for accuracy by our quality team before publication. Last updated .