Jewelry repair is an essential part of ownership. Even well-cared-for pieces eventually need maintenance - prongs wear, clasps break, strings stretch. Understanding common repairs, their costs, and when to repair vs replace helps you make informed decisions.
| Repair | Cost Range | Time | Urgency |
|---|---|---|---|
| Prong re-tipping (1 prong) | $20-40 | 1-3 days | High - prevents stone loss |
| Prong re-tipping (all prongs) | $50-120 | 1-3 days | High |
| Ring resizing (up/down 1-2 sizes) | $30-80 | 1-3 days | Medium |
| Ring resizing (complex, with stones) | $60-150 | 3-7 days | Medium |
| Clasp replacement | $20-60 | 1-3 days | Medium |
| Chain repair (soldering link) | $20-50 | 1-3 days | Medium |
| Pearl restringing | $30-80 | 3-7 days | Medium |
| Stone replacement | $50-500+ | 3-14 days | High |
| Rhodium plating | $20-60 | 1-3 days | Low |
| Professional polishing | $20-50 | 1-3 days | Low |
| Broken shank repair | $50-150 | 3-7 days | High |
Prongs hold gemstones in place, but they wear down over years of daily wear. When prongs become thin or worn flat, stones can fall out. Signs of prong wear: you can feel sharp or flat tips, the stone wiggles, or light shows under the prong edge. Re-tipping (adding metal to worn prongs) costs $20-40 per prong and is far cheaper than replacing a lost diamond.
Have prongs inspected every 6-12 months. Most jewelers offer free inspections. This is the single most important preventive maintenance for stone-set jewelry.
Rings can typically be resized up or down 1-2 sizes without issues. Beyond that, the ring may need a shank replacement or may not be resizable (eternity bands, some tension settings). Resizing involves cutting the shank, adding or removing metal, and soldering. Rings with stones around the band (eternity) cannot be resized without removing stones.
Chain breaks usually occur at a weak link or near the clasp. Soldering a broken link costs $20-50. If a chain breaks repeatedly in the same spot, it may be worn thin and should be replaced rather than repaired. Clasp replacement ($20-60) is common for spring rings and lobster clasps that lose tension over time.
Pearl necklaces should be restrung every 1-2 years if worn regularly. The silk thread stretches, absorbs oils, and weakens. A broken string can scatter and lose pearls. Professional restringing with knots between each pearl costs $30-80 and includes cleaning. Signs you need restringing: stretched thread, gaps between pearls, frayed thread near clasp.
| Scenario | Repair or Replace? | Reason |
|---|---|---|
| Worn prongs on valuable ring | Repair | Prevents stone loss, much cheaper |
| Broken cheap fashion chain | Replace | Repair may exceed item value |
| Loose stone in setting | Repair immediately | Prevents loss |
| Thin/worn ring shank | Repair (re-shank) | Restores structural integrity |
| Multiple broken chain links | Replace | Chain is fatigued, will break again |
| Lost small stone in cheap ring | Replace ring | Stone + setting cost may exceed value |
| Damaged antique/vintage piece | Repair | Historical/intrinsic value justifies repair |
| Worn plating on white gold | Re-plate | Standard maintenance |
| Task | Frequency | Cost |
|---|---|---|
| Prong/setting inspection | Every 6 months | Free at most jewelers |
| Professional cleaning | Every 6-12 months | Free-$20 |
| Prong re-tipping | As needed | $20-120 |
| Pearl restringing | Every 1-2 years | $30-80 |
| Rhodium plating (white gold) | Every 6-18 months | $20-60 |
| Clasp check | Every 6 months | Free inspection |
Signs of worn prongs include: the stone wiggles when touched, prong tips feel flat or sharp (instead of rounded), you can see light under the prong edge, or the prong looks thin compared to when new. Have prongs inspected every 6-12 months - re-tipping costs $20-40 per prong, far less than replacing a lost diamond.
Most rings can be resized up or down 1-2 sizes. Rings that cannot be resized include: eternity bands (stones all around), some tension settings, rings with intricate patterns around the band, and rings made of tungsten or titanium (cannot be soldered). For significant size changes (2+ sizes), a jeweler may need to replace part of the band.
Cost depends on size and quality: small melee diamonds (0.01-0.05ct) cost $20-100 each; 0.25ct diamonds cost $300-800; 0.5ct cost $800-2,000; 1ct cost $3,000-8,000+. This is why prong maintenance and jewelry insurance are so important - prevention is far cheaper than replacement.
For fashion jewelry under $50, repair often costs more than replacement. However, if the piece has sentimental value or is no longer available, repair may be worth it. For valuable or sentimental pieces, always repair - the cost is usually a fraction of replacement, and skilled jewelers can restore most pieces.
More expert guides at HOLYCOME. Wholesale: service@holycome.com.
Rhodium plating, which gives white gold jewellery its bright finish, is covered in the Wikipedia article on rhodium.
Related reading: 925 Sterling Silver: The Complete Guide for Jewelry Manufacturers, 18K Gold vs 14K vs 10K: Which Karat Is Right for Your Jewelry Line?, PT950 Platinum: Why It's the Premium Choice for Fine Jewelry.
Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.
Contact on WhatsApp service@holycome.comWritten by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.
Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.
Reviewed for accuracy by our quality team before publication. Last updated .