Pure precious metals are too soft for jewelry, so they are alloyed with other metals to improve hardness, create color variations, and reduce cost. Understanding alloy compositions helps manufacturers and consumers make informed choices.
Pure gold (24K) is very soft (25-30 HV) and easily scratched or bent. Pure silver (999) is similarly soft. Alloying adds other metals to:
| Alloy | Gold pct | Copper pct | Silver pct | Other | Color |
|---|---|---|---|---|---|
| 24K Yellow | 99.9 | 0 | 0 | None | Deep yellow |
| 18K Yellow | 75 | 5-10 | 15-20 | Zinc | Rich yellow |
| 14K Yellow | 58.3 | 10-15 | 25-30 | Zinc | Good yellow |
| 18K White | 75 | 0-5 | 0-10 | Ni/Pd 10-15 | White (needs rhodium) |
| 14K White | 58.3 | 0-5 | 0-10 | Ni/Pd 20-25 | White (needs rhodium) |
| 18K Rose | 75 | 20-22 | 2-3 | None | Warm pink |
| 14K Rose | 58.3 | 35-40 | 1-3 | None | Deeper pink |
| Alloy | Silver pct | Copper pct | Other | Use |
|---|---|---|---|---|
| Fine Silver | 99.9 | 0 | None | Investment, collectible |
| Sterling Silver | 92.5 | 7.5 | None | Standard jewelry |
| Britannia Silver | 95.8 | 4.2 | None | UK standard, softer |
| Argentium Silver | 93.5 | 5.5 | Germanium 1pct | Tarnish-resistant |
Sterling silver (925) is the standard for jewelry. The 7.5pct copper provides hardness while maintaining silver color and workability. Argentium silver adds germanium for improved tarnish resistance.
| Alloy | Platinum pct | Alloy | Hardness | Use |
|---|---|---|---|---|
| PT950 | 95 | Ruthenium 5pct | 110-130 HV | Standard jewelry |
| PT900 | 90 | Iridium 10pct | 120-140 HV | Older standard |
| PT950 Cobalt | 95 | Cobalt 5pct | 130-150 HV | Casting improved |
Platinum is alloyed with ruthenium, iridium, or cobalt for hardness. PT950 is the global standard. Platinum is denser (21.45 g/cm3) than gold, so a platinum ring of the same dimensions weighs 60pct more and contains more precious metal by weight.
| Application | Recommended Alloy | Reason |
|---|---|---|
| Engagement ring | 14K/18K gold or PT950 | Durability + value |
| Wedding band | 14K gold or PT950 | Daily wear durability |
| Fashion earrings | 925 silver or 10K gold | Affordable, sufficient durability |
| Necklace chain | 14K gold or silver | Workability, strength |
| Bracelet | 14K gold or stainless steel | Impact resistance |
| Heirloom piece | 18K gold or platinum | Purity, lasting value |
| Hypoallergenic | PT950, Pd950, or titanium | No nickel, inert |
Always source precious metal alloys from certified refiners. Reputable suppliers provide assay certificates verifying composition. Use pre-alloyed grain or sheet rather than mixing your own. For gold, use alloys specifically formulated for jewelry casting (not dental or industrial alloys).
Copper is the primary alloying metal because it hardens soft precious metals while maintaining good workability. In gold, copper also creates rose/pink color. In sterling silver, 7.5pct copper provides the hardness needed for jewelry while keeping 92.5pct silver content. Too much copper can cause porosity in casting and fire scale during soldering.
Nickel white gold uses nickel as the whitening agent - it is cheaper and harder, but nickel is a common allergen affecting 10-15pct of people. Palladium white gold uses palladium instead - it is hypoallergenic, naturally whiter, but more expensive. For customers with sensitive skin, palladium white gold or platinum is recommended.
Yes, 10K gold contains 41.7pct pure gold and is legally considered gold in the US (minimum 10K). It is harder and more durable than 14K or 18K, but has a paler yellow color and is more likely to cause skin reactions due to higher alloy content. In some European countries, 10K is not legally recognized as gold.
Argentium silver is a modern sterling silver alloy containing 93.5pct silver, 5.5pct copper, and 1pct germanium. The germanium creates a protective oxide layer that significantly reduces tarnishing compared to traditional sterling silver. It is also more ductile and has a brighter white color. It costs slightly more but requires less maintenance and is gaining popularity in fine jewelry.
More expert guides at HOLYCOME. Wholesale: service@holycome.com.
Sterling silver terminology used in this guide follows the Wikipedia entry on sterling silver.
Related reading: Gold vs Platinum: Which Metal Is Better for Your Jewelry?, Silver vs Gold: Which Metal Is Trending Now, 925 Sterling Silver: The Complete Guide for Jewelry Manufacturers.
Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.
Contact on WhatsApp service@holycome.comWritten by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.
Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.
Reviewed for accuracy by our quality team before publication. Last updated .