Comparisons

Incoming QC for Comparisons: Ten Minutes Per Carton - HOLYCOME

Incoming QC for Comparisons: Ten Minutes Per Carton - HOLYCOME

Buyers do not fail on comparisons because the design is wrong; they fail because the range was never read as a range.

SECTION 01Most defects are visible in the first ten minutes

Incoming inspection is not a full re-inspection. It is a fast check against the spec sheet on the fields that fail most often. The range holds 4460 designs in this category.

Ten minutes per carton catches the majority of build drift before it reaches a customer.

Read the metal line as a lead time signal: 925 sterling silver at 99% is the path production already runs every week.

SECTION 02The ten-minute sequence

StepCheckReject signal
1Count against the packing listShort or substituted designs
2Metal stamp and toneStamp missing or tone uneven
3Stone seating, reverse sideAny movement under light pressure
4Size against the ordered bandMore than one size out

925 sterling silver accounts for 99% of the designs. Lab grown diamond is the dominant stone at 66%; moissanite makes up 33%.

A range of 4460 designs is deep enough that a shortlist of six can be drawn without leaving a price slot empty.

SECTION 03Why the reverse side is the fastest check

Loose stones show at the back first. Tilting the piece under a lamp and looking at the gallery takes seconds and catches the defect that would otherwise become a return.

Round cuts lead at 67%, followed by classic at 16%.

The stone concentration matters at the listing level: 66% of the range can be described with one consistent disclosure line.

SECTION 04Recording what you find

  • Photograph the defect, not the design
  • Record the design code and the carton
  • Note whether the defect is build or transit
  • Keep a running rate per design, not per shipment

Reference designs in the range include Round Bezel Moissanite Engagement Ring; Square Bezel Moissanite Engagement Ring; Round Bezel Moissanite Engagement Ring.

The figure of 4460 is worth reconciling against your own shortlist before the quote, because it sets how much of the buy can be stock.

Cuts outside the Round lead are where a range differentiates, and also where a sample request is most likely to come back late.

SECTION 05What the record changes

A defect rate per design tells you which line to drop and which to keep. A defect rate per shipment only tells you that something went wrong once.

Round at 67% is the cut a photographer can light consistently, which shortens the time from sample to listing.

SECTION 06Range snapshot: Comparisons by the numbers

Lab grown diamond is the dominant stone at 66%; moissanite makes up 33%.

DimensionReadingBuying note
Designs on file4460Shortlist can come from stock patterns
Dominant metal925 sterling silver (99%)Quote cycle stays short
Dominant stonelab grown diamond (66%)Sourcing already settled
Leading cutRound (67%)Consistent visual language

Lab grown diamond is the dominant stone at 66%; moissanite makes up 33%. Read the snapshot before the shortlist: a category that is narrow in metal but deep in cut behaves differently from one that is the other way round.

SECTION 07Frequently Asked Questions

Do I need to inspect every carton?

Sampling is normal, but the sample has to be random and recorded. Inspecting only the top layer teaches nothing.

What is the most common incoming defect?

Loose stones and plating tone variation. Both are visible in the first minutes if the reverse side is checked.

Should I reject a whole carton for one defect?

Only if the defect is systemic. One piece is a note; the same defect across the carton is a rejection.

How do I track supplier quality over time?

By defect rate per design, not per order. The design-level figure is what informs the reorder.

Is QC the buyer's job or the factory's?

Both, at different stages. Incoming QC is the last cheap point before the customer.

If you want to work from the current range rather than from a catalogue PDF, send the two price slots you sell and the size bands you stock. We will reply with the designs that fit, the build on each, and the reorder path. HOLYCOME keeps the full range in one place.

Frequently Asked Questions

Do I need to inspect every carton?
Sampling is normal, but the sample has to be random and recorded. Inspecting only the top layer teaches nothing.
What is the most common incoming defect?
Loose stones and plating tone variation. Both are visible in the first minutes if the reverse side is checked.
Should I reject a whole carton for one defect?
Only if the defect is systemic. One piece is a note; the same defect across the carton is a rejection.
How do I track supplier quality over time?
By defect rate per design, not per order. The design-level figure is what informs the reorder.
Is QC the buyer's job or the factory's?
Both, at different stages. Incoming QC is the last cheap point before the customer.
E

Editorial Team

Senior editor at HOLYCOME, specializing in gemstone identification, jewelry manufacturing, and wholesale sourcing guides.

Looking for Wholesale Jewelry?

Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.

Contact on WhatsApp service@holycome.com

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .