Sizing Guide

Sizing Guide Wholesale: Landed Cost Math for a First Order

Sizing Guide Wholesale: Landed Cost Math for a First Order

SECTION 01Why sizing kills first-order margins before the stones do

I have sat in the QC room for twelve years, and the same thing happens to new buyers almost every time. They chase the cheapest per-carat moissanite quote, then lose the margin on ring sizing spread, dead stock and freight. The stone price is the headline. Sizing is where the money actually lives.

So before you compare quotes, do the landed cost math on a mixed ring order. That is the number your accountant cares about, not the FOB price on the PDF.

Below is the way I walk a first-time buyer through a 200-piece starter order, with real line items instead of theory.

SECTION 02The five cost lines on a first order

Every wholesale jewelry order carries five lines. Miss one and your margin estimate is fiction.

  • Finished piece cost: metal weight plus stone cost plus labor and setting.
  • Sizing spread: the cost of stocking several sizes per design instead of one.
  • Freight: DDP door delivery runs about 5 to 8 days from our floor to yours.
  • Duty and tax: usually folded into DDP, but confirm the incoterm in writing.
  • Dead stock and returns: the sizes nobody reorders, sitting in your case.

Line two and line five are the ones buyers forget. They are also the ones a factory can actually fix for you.

SECTION 03Worked example: 200 pieces, three designs, six sizes

Take a plain 925 silver solitaire, a three-stone band and a tennis bracelet, all set with moissanite. Assume an average finished cost of 9.00 USD per piece at 200 pieces, which is realistic territory for silver with 1ct equivalent stones.

Goods value lands near 1,800 USD. DDP freight on that weight is typically 180 to 260 USD depending on destination and box count. Divide freight by pieces and you get roughly 1.00 to 1.30 USD per piece added to your unit cost.

Now the sizing spread. If you stock six sizes per design at even quantities, you carry stock in sizes that will not sell at the same rate. Sizes 5 and 9 move slower than 7 in most US retail. That is not a production problem, it is a cash-flow problem.

Cost lineBasisAmount (USD)Per piece (USD)
Goods, 200 pcsAverage 9.001,8009.00
DDP freight5 to 8 days door2201.10
Sizing spares, 40 pcsSlow sizes, held3601.80
QC and certificate packGRA per piece, IGI on request900.45
Payment feesT/T 30% deposit450.23

Landed cost per piece lands around 12.58 USD. If you planned on 9.00 and priced retail against that, you just lost a quarter of your margin on paper.

SECTION 04Where the factory can cut your cost without cutting grade

Three levers matter more than haggling on the stone price.

1. Size the assortment, not every design

Stock full size runs only on your top two designs. For the rest, order sizes 6 through 8 and offer resize on the back end. A silver band resizes cheaply. That single decision usually removes most of the sizing spares line.

2. Use stock for the test, custom for the reorder

Our MOQ is 1 piece for stock items and 30 pieces for custom. Use that. Order singles in stock sizes, test them on real customers, then commit your 30-piece custom run to the sizes that actually sold. You will not guess the size curve correctly on order one.

3. Fix the certificate plan before production

GRA cards come with every piece. IGI reports are per-stone and cost real money, so decide which SKUs need them. Putting IGI on a 9.00 USD silver ring is usually wasted spend.

SECTION 05Lead time and QC, and why they show up in your cost

Production runs 12 to 18 days after deposit and artwork approval. Add 5 to 8 days DDP transit. That is your true cash cycle, and it decides how much working capital sits in sizing spares.

Our QC is three stages: incoming stone check on arrival at the bench, in-process inspection during setting and polishing, and a pre-ship AQL pull before packing. The pre-ship pull is the one that protects you. Rework found at that stage costs us, not you.

Here is the honest part about why our cost, speed and yield run about 20 percent better than typical trading companies. We are the factory, not a middle layer. Stones are checked on our own bench, silver is cast in-house, and there is no third party adding markup or holding your order in a queue while they source it. Fewer handoffs means less rework and shorter lead time.

Every handoff between a trader and a factory is a place where sizing gets written wrong and nobody catches it until the AQL pull.

SECTION 06Payment terms and what to check on the invoice

Standard terms are T/T with 30 percent deposit and balance before shipment. For samples, PayPal is fine and keeps it simple. Confirm three things on the invoice before you pay: the size breakdown per SKU, the incoterm, and whether certificates are per piece or per order.

If the size breakdown is a single line saying assorted, ask for the grid. That line is where most first-order disputes start.

SECTION 07Frequently Asked Questions

What is the minimum order for a first sizing test?

Stock items start at 1 piece, so you can test single sizes before committing. Custom sizing and custom design runs start at 30 pieces per SKU, with production at 12 to 18 days after deposit.

How is the price quoted, per piece or per carat?

Finished jewelry is quoted per piece, based on metal weight, stone grade and setting labor. Loose stones are quoted per carat. Ask for both breakdowns if your order mixes the two.

Do you ship DDP and how long does it take?

Yes, DDP door delivery runs about 5 to 8 days to US and EU addresses after the pre-ship AQL passes. Duty and clearance are handled inside the DDP term, so confirm the destination address on the invoice.

SECTION 08Get the numbers before you commit

Send me your design list, target size grid and destination zip code, and I will come back with a landed cost sheet per piece, including freight and certificate options, plus a sample plan if you want to test sizes first. Reach the floor at WhatsApp +86 133 7744 7107 or service@holycome.com and ask for the sizing cost breakdown.

S

Sarah Lin

GIA Graduate Gemologist (G.G.) with ten years of experience in gem identification and colored-stone grading, having examined over 10,000 stones.

Looking for Wholesale Jewelry?

Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.

Contact on WhatsApp service@holycome.com

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .