Sizing Guide

Sizing Guide Private Label Carton: Carton Cube, Duty and the Freight Line That Surpri - HOLYCOME

Sizing Guide Private Label Carton: Carton Cube, Duty and the Freight Line That Surpri - HOLYCOME

SECTION 01Carton Cube, Duty and the Freight Line That Surprises Buyers

The brief was simple: 200 sizing Guide, 925 sterling silver, delivered before October. The run that arrived carried 17 pieces with prong geometry, and the buyer spent USD 30-90 on sorting before the goods reached a shelf, certified GRA report and packed private-label carton with hangtag at 200 pieces.

On a 200-piece order at USD 45-252, a prong geometry rate above two percent is not a quality surprise. It is a costing error that shows up as a credit note three weeks later.

Sizing Guide wholesale piece from the HOLYCOME line in Wuzhou

Nothing in the rebuild was expensive. A gauge, a written limit and a retained tray did the work that a discount would only have delayed, with GRA report and private-label carton with hangtag stated on the same sheet, and the Private Label Carton quote for it sits at USD 45-252.

SECTION 02What US buyers Check Before They Sign

At USD 45-252 per piece the four measurements below are worth more than the discount being negotiated. One of them costs nothing to write down.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Stone colour consistencyGraded by eye under D65Colour matched to a retained master stone, per trayRepeat colour complaint in the same SKU
Sizing drift across the runNot measuredGo/no-go gauge on every size, drift held under 0.15 mmResize queue and reship cost
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement

Write these into the Private Label Carton purchase order and the arrival check becomes arithmetic instead of recollection, shipped as private-label carton with hangtag and certified GRA report.

SECTION 03Private Label Packaging for sizing Guide

Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, which the Private Label Carton file records at USD 45-252 in private-label carton with hangtag.

Sizing Guide setting and finish detail on a HOLYCOME factory sample

The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin sizing Guide. Below 0.8 mm of shank width we recommend the hangtag only, with GRA report and private-label carton with hangtag stated on the same sheet.

Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, the figure being USD 45-252 for a 200-piece run.

SECTION 04Where USD 45-252 Per Piece Actually Goes

Cost at USD 45-252 leaves no room for assumption. The table shows which line compresses and which line only moves quality down.

Cost lineShareWhat moves it
Base metal or alloy for sizing Guide30%Alloy choice and casting yield
Stone or melee for sizing Guide20%Sieve range and lot batching
Setting and finishing labor for sizing Guide19%Jig design and bench minutes
Plating, polish and QC for sizing Guide12%Per-tray versus per-piece checks
Packaging for sizing Guide19%private-label carton with hangtag

A factory that cannot state its bench minutes per piece has never costed its own line. Ask for minutes and for the reject rule, not for a discount, which is how the Private Label Carton account reads it at USD 45-252.

SECTION 05The Three Failures We See Most in Incoming Samples

size-step drift

A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, which is USD 45-252 on the Private Label Carton schedule.

In a 200-piece run this typically shows on 17 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, on a 200-piece Private Label Carton order at USD 45-252.

prong geometry

A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, which the Private Label Carton file records at USD 45-252 in private-label carton with hangtag.

The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 45-252.

rhodium burn-off

A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, and the Private Label Carton quote for it sits at USD 45-252.

Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, certified GRA report and packed private-label carton with hangtag at 200 pieces.

SECTION 06Order Terms, Sample Timing and Packing

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, with GRA report and private-label carton with hangtag stated on the same sheet.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 45-252 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which the Private Label Carton file records at USD 45-252 in private-label carton with hangtag.

Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, certified GRA report and packed private-label carton with hangtag at 200 pieces.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and at USD 45-252 for 200 pieces that is the number the buyer signs.

SECTION 07What a Report Proves and What It Does Not

Most quotes for sizing Guide describe the product and skip the part that decides whether the buyer makes money, and the Private Label Carton quote for it sits at USD 45-252.

The commercial version of this question for sizing Guide is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, with GRA report and private-label carton with hangtag stated on the same sheet.

That clause matters more than a discount on sizing Guide. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, quoted at USD 45-252 per piece in private-label carton with hangtag.

SECTION 08The Sample Approval That Survives Production

This is the question that separates a trading company from a factory, and on sizing Guide the answer is usually shorter than buyers expect, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 45-252.

We run this check per tray rather than per carton because the defect that matters on sizing Guide is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, certified GRA report and packed private-label carton with hangtag at 200 pieces.

The report the buyer receives states the count per tray, the measured average and the outlier count for sizing Guide. It is deliberately unglamorous, and it is the document that settles most disputes before they start, which the Private Label Carton file records at USD 45-252 in private-label carton with hangtag.

SECTION 09How a Repeat Order Gets Built

Nothing in this sequence is unusual, and that is the point. Each step exists because skipping it produced a specific failure on a previous order, which the Private Label Carton file records at USD 45-252 in private-label carton with hangtag.

  1. Agree the stamp position, the hangtag copy and the box print before the first carton.
  2. Print the cartons and hangtags in one run: a sticker on a matte box reads as a repack.
  3. Set the barcode and the FNSKU mapping for every SKU before the label file is approved.
  4. Build the first carton at the quoted quantity so the pack-out is proven, not assumed.
  5. Hold a retained carton as the pack reference for every reorder.

Reorders inside this sequence run 12-15 days because the model, the gauge set and the signed spec stay in our system, quoted at USD 45-252 per piece in private-label carton with hangtag.

SECTION 10What This Means for a First Order

A first Private Label Carton order of 50 pieces per design at USD 45-252 tests the line rather than the range. Three designs covers the shelf.

Ask for the retained tray and the GRA report batch sheet with the first shipment. Both are free and both decide the reorder, which is USD 45-252 on the Private Label Carton schedule.

SECTION 11Freight, Duty and the Arrival Check

Export runs through Guangzhou or Shenzhen. Air lands in 5-8 days on the US west coast, 7-10 on the east, and sea takes roughly three times the transit, certified GRA report and packed private-label carton with hangtag at 200 pieces, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 45-252.

FOB is the default on sizing Guide and DDP is the option. Buyers new to the US market usually take DDP once, then switch after they see the breakdown, the figure being USD 45-252 for a 200-piece run.

If prong geometry appears in the arrival check, the retained tray decides who owns it. Keep the GRA report batch sheet in the same folder as the packing list, and the Private Label Carton quote for it sits at USD 45-252.

SECTION 12Frequently Asked Questions

What is the minimum order for sizing Guide?

50 pieces per sizing Guide. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, quoted at USD 45-252 per piece in private-label carton with hangtag.

Do you supply certificates for sizing Guide?

GRA report on sizing Guide above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of stone retention after a 40-cycle wear test, which is what a counter or a listing actually needs, shipped as private-label carton with hangtag and certified GRA report.

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if prong geometry shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, on a 200-piece Private Label Carton order at USD 45-252.

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, on a 200-piece Private Label Carton order at USD 45-252.

What is the minimum order for sizing Guide?

50 pieces per sizing Guide. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, quoted at USD 45-252 per piece in private-label carton with hangtag.

SECTION 13Next Step

The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070, subject Private Label Carton, which is USD 45-252 on the Private Label Carton schedule.

HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, priced at USD 45-252 for the 200-piece Private Label Carton run.

Related reading: Sizing Guide Vermeil Upgrade: Alloy, Karat and the Cost of a Color Change - HOLYCOME Sizing Guide Valentine Program: Sample to Container: The Real Calendar - HOLYCOME

E

Editorial Team

Senior editor at HOLYCOME, specializing in gemstone identification, jewelry manufacturing, and wholesale sourcing guides.

Looking for Wholesale Jewelry?

Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.

Contact on WhatsApp service@holycome.com

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .