Metal Guide

Metal Guide Wholesale: First-Order Landed Cost Math

Metal Guide Wholesale: First-Order Landed Cost Math

SECTION 01Why your first order almost never lands where the quote said

Buyers send me a target price and I send back a number that is 15 to 25 percent higher once it is sitting in their warehouse. That gap is not a trick. It is the difference between a unit price and a landed cost, and on a first order the gap is widest because nobody has calibrated the assumptions yet.

This walkthrough is the arithmetic I run with new accounts before we cut a single PO. It covers moissanite, lab-grown diamond and 925 silver because that is what we make, but the logic holds for any metal jewelry you import from China.

One framing number to carry through: on a comparable spec, our total cost and yield run roughly 20 percent better than a typical trading company. The reason is boring and structural. We are the factory, so there is no middle margin, no second QC layer, and no relabeling step where stones get swapped. That 20 percent shows up in the math below, not in a slogan.

SECTION 02The five lines that make up landed cost

Every landed cost I have ever built fits into five lines. Miss one and your margin disappears quietly.

  • Metal: the actual gram weight at the day's spot price plus a fabrication premium.
  • Stones: moissanite, lab-grown diamond or CZ, priced per carat by size and clarity band.
  • Labor and finish: setting, polishing, plating, and any hand work.
  • Freight and insurance: courier to your door, not to a port.
  • Duty, tax and the mistake reserve: the line most buyers forget.

The mistake reserve deserves a sentence. On a first order, expect 2 to 5 percent of goods value to be eaten by remakes, size corrections or a stone that photographs wrong against your brand's lighting. Budget it up front and it stops being a crisis.

SECTION 03Metal cost: weight times spot, plus a premium you can argue with

Silver sits in the tens of dollars per troy ounce, gold in the thousands. Those are public numbers, and nobody should be paying a mystery premium on top of them. What you should interrogate is the fabrication premium: the delta between raw metal and a finished, solderable, polishable part.

For 925 silver, the premium covers alloying, casting loss and finishing. For gold-filled or vermeil, it covers the clad layer thickness, which is where cheap suppliers shave cost and where your plating wears through in eight weeks. Ask for the micron thickness in writing.

Two practical rules. First, price metal by finished gram weight, not by the weight of the wax model. Second, lock the spot reference to a specific date and source in the PO, so a two-week production window does not become a renegotiation.

If a supplier will not tell you the finished gram weight before you pay the deposit, you are not buying jewelry, you are buying a hope.

SECTION 04Stone cost: where the real spread hides

Moissanite and lab-grown diamond are both priced per carat, but the curve is not linear. A 1.0 ct stone is not double a 0.5 ct stone in cost, and a 3.0 ct is not triple a 1.5 ct. Melee under 2 mm is priced by the parcel and the difference between grades is small in dollars but huge in how the finished piece reads.

This is where the trading-company model costs you. A trader buys parcels on price, not on consistency, so your second order can arrive a half grade warmer than the first. We check every incoming parcel at the stone stage before it touches a bench, which is the first of our three QC gates: incoming stone check, in-process inspection at setting and polish, and a pre-ship AQL sample pull.

Certificates matter for the value line. GRA covers moissanite, IGI covers lab-grown diamond. If your listing says IGI, the certificate number must match the stone, and you should be able to verify it independently before the goods ship.

SECTION 05A worked example on 300 pieces

Numbers below are illustrative, not a quote. Substitute your own spec and the structure still holds.

LineBasisShare of landed cost
925 silver metalFinished gram weight x spot + premium28-34%
Moissanite stonesPer carat by size band18-26%
Labor and finishPer piece by setting complexity20-25%
Freight and insuranceDDP courier, 5-8 days4-7%
Duty, tax, mistake reserveDestination rate + 2-5%10-18%

Read the table as a shape, not a quote. The lesson is that metal and stones together are usually half your landed cost, and the other half is where first-time buyers get surprised. Freight on a 300-piece order is not the enemy. Duty classification and a bad size run are.

SECTION 06Payment, timing and the cash flow nobody plans for

Standard terms are 30 percent deposit by T/T, balance against pre-shipment inspection. For samples, PayPal is fine and faster for both sides. Production runs 12 to 18 days once artwork and stone spec are locked, and DDP delivery adds 5 to 8 days to your door.

What people forget is the calendar, not the cost. Add your own photography, listing setup and a buffer for one remake cycle, and a first order realistically occupies five to six weeks from deposit to sellable inventory. Order in stock items and you collapse that to days, because stock MOQ is one piece. Custom MOQ is 30 pieces per design.

That one-piece stock option is the cheapest way to de-risk a first order. Buy three or four stock SKUs, shoot them, test the response, then commit to the 30-piece custom run with real data instead of a hunch.

SECTION 07Where the 20 percent actually comes from

Three places, and you can audit all of them.

  • No trading margin stacked on top of factory cost.
  • One QC team instead of two, so no double handling and no re-inspection fees.
  • Stone parcels bought against a fixed grade spec, so yield per carat is predictable and scrap is lower.

Yield is the quiet one. If a setter rejects 6 percent of stones instead of 12 percent, that difference lands directly in your unit cost. It is also why I push buyers to send reference photos with a color temperature note. Matching a grade is easy. Matching a grade to someone's phone screen is not.

SECTION 08Frequently Asked Questions

What is the minimum order for a first order?

Stock items ship from one piece, which is how most new buyers start. Custom designs carry a 30-piece minimum per style, and that covers your own mold, stone layout and logo stamp.

How long does production and delivery take?

Production is 12 to 18 days after deposit and spec sign-off. DDP delivery adds 5 to 8 days, so a custom first order typically reaches you in about three to four weeks.

How is price quoted, and what is included?

We quote per piece against a stated metal weight, stone spec and certificate type, with the spot reference date written into the quote. Freight and duty can be quoted DDP so the number you see is the number you pay.

Send your spec, target quantity and destination zip to service@holycome.com or WhatsApp +86 133 7744 7107, and I will send back a line-by-line landed cost with the gram weights and stone grades exposed, plus a sample quote if you want to test three pieces before committing.

S

Sarah Lin

GIA Graduate Gemologist (G.G.) with ten years of experience in gem identification and colored-stone grading, having examined over 10,000 stones.

Looking for Wholesale Jewelry?

Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.

Contact on WhatsApp service@holycome.com

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .