The brief was simple: 800 metal Guide, 10K/14K/18K gold, delivered before September. The run that arrived carried 17 pieces with stamp accuracy, and the buyer spent USD 25-95 on sorting before the goods reached a shelf, and the Distributor Tier quote for it sits at USD 42-304.
The incoming report named stamp accuracy and the purchase order did not. On a Distributor Tier run that gap between documents is the whole reason a tray fails inspection, shipped as bulk carton, 50 per bag and certified SGS batch report.
We did not touch the retail price. We changed what travels with the bulk carton, 50 per bag carton, and the Distributor Tier account stopped re-inspecting every tray, and the Distributor Tier quote for it sits at USD 42-304.
At USD 42-304 per piece there is no room for hidden cost. The table shows where the money sits and which line a supplier can actually compress.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for metal Guide | 30% | Alloy choice and casting yield |
| Stone or melee for metal Guide | 20% | Sieve range and lot batching |
| Setting and finishing labor for metal Guide | 19% | Jig design and bench minutes |
| Plating, polish and QC for metal Guide | 12% | Per-tray versus per-piece checks |
| Packaging for metal Guide | 19% | bulk carton, 50 per bag |
A supplier with no bench minutes per piece has never costed metal Guide. Ask for minutes and the reject rule before you ask for a discount, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
A quote for metal Guide usually states carat weight or metal type, and stops there. The four points below are what actually decide whether a run sells through or comes back, which is how the Distributor Tier account reads it at USD 42-304.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Each line above is a gauge check, not a marketing claim. A factory that cannot state them in numbers is quoting an opinion about metal Guide, which the Distributor Tier file records at USD 42-304 in bulk carton, 50 per bag.
A distributor does not buy a metal Guide, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, which is USD 42-304 on the Distributor Tier schedule.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, quoted at USD 42-304 per piece in bulk carton, 50 per bag.
Turn is the number the distributor manages. At USD 42-304 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of metal Guide move in 800-piece lots rather than in the 50-piece sample quantity.
A 14K stamp on 13.6K metal is a legal exposure, not a cosmetic one. Assay per lot is the only defensible check, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Our countermeasure is a gauge and a written limit. It adds about 21 seconds per piece and removes the defect from the run rather than from the carton, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Two alloy lots of 14K rose can read peach and copper under the same light. Holding a master color chip per order keeps a collection coherent, on a 800-piece Distributor Tier order at USD 42-304.
In a 800-piece run this typically shows on 8 of pieces. Catching it means measuring assay within 0.3K of the stamp at the tray level, not inspecting the finished carton, shipped as bulk carton, 50 per bag and certified SGS batch report.
A sizing joint soldered with too much flux pits after polish and cracks in wear. Joint inspection belongs in the final QC, not the bench, which the Distributor Tier file records at USD 42-304 in bulk carton, 50 per bag.
The commercial effect is refining loss plus a legal stamp correction, typically USD 15-28 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, priced at USD 42-304 for the 800-piece Distributor Tier run.
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and the Distributor Tier quote for it sits at USD 42-304.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 42-304 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, on a 800-piece Distributor Tier order at USD 42-304.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of assay within 0.3K of the stamp for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 42-304.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
On metal Guide, the difference between a 40-day order and a 90-day order is usually two signatures, not a factory delay, the figure being USD 42-304 for a 800-piece run.
One practical note on timing for metal Guide: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, which is USD 42-304 on the Distributor Tier schedule.
We date the metal Guide proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, which the Distributor Tier file records at USD 42-304 in bulk carton, 50 per bag.
Buyers in US wholesale tend to over-index on unit price for metal Guide and under-index on what happens after delivery, priced at USD 42-304 for the 800-piece Distributor Tier run.
In US wholesale terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For metal Guide, we publish the figure per SKU and hold it for the order window rather than for the calendar year, shipped as bulk carton, 50 per bag and certified SGS batch report.
Practically, it shows up in three places for metal Guide: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, and at USD 42-304 for 800 pieces that is the number the buyer signs.
Nothing in this sequence is clever. Each step exists because skipping it produced a specific failure on a previous order of metal Guide, the figure being USD 42-304 for a 800-piece run.
Reorders run 12-15 days because the model, the gauge set and the signed spec stay in our system between the Distributor Tier runs, priced at USD 42-304 for the 800-piece Distributor Tier run.
At 800 pieces the carton count drives freight more than the weight. bulk carton, 50 per bag packs tighter than a display tray and saves a pallet position, priced at USD 42-304 for the 800-piece Distributor Tier run.
FOB Guangzhou or Shenzhen is the default on metal Guide. Buyers new to US wholesale take DDP once and switch after they see the breakdown, which is USD 42-304 on the Distributor Tier schedule.
If stamp accuracy shows in the arrival check, the retained tray decides ownership. Keep the SGS batch report sheet beside the packing list, priced at USD 42-304 for the 800-piece Distributor Tier run.
A first order of 50 pieces per design is a measurement, not a purchase. It shows how assay within 0.3K of the stamp and color match to the master chip behaves on this line and whether the QC sheet matches the carton, with SGS batch report and bulk carton, 50 per bag stated on the same sheet, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Six weeks of testing is cheaper than a season of returns on metal Guide. That is the entire argument for a small first order, priced at USD 42-304 for the 800-piece Distributor Tier run.
Rhodium at 0.20 micron minimum on white metal Guide, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, and the Distributor Tier quote for it sits at USD 42-304.
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, which is USD 42-304 on the Distributor Tier schedule.
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 42-304.
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, on a 800-piece Distributor Tier order at USD 42-304.
Rhodium at 0.20 micron minimum on white metal Guide, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, and the Distributor Tier quote for it sits at USD 42-304.
Put your current quote beside ours on assay within 0.3K of the stamp and color match to the master chip, plating thickness, dimensional tolerance and the reject rule. The comparison usually settles it quickly, and the Distributor Tier quote for it sits at USD 42-304.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, which is how the Distributor Tier account reads it at USD 42-304.
Related reading: Metal Guide Trade Show Sample: What the Quote Actually Covers - HOLYCOME Buying Guides Shopify DTC: The Sample Approval That Survives Production - HOLYCOME
Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.
Contact on WhatsApp service@holycome.comWritten by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.
Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.
Reviewed for accuracy by our quality team before publication. Last updated .