Two buyers ordered the same metal Guide in the same month. One paid 9% less and absorbed 23 rejects out of 200 pieces; the other paid our quote and shipped clean. The difference was stamp accuracy, and it was measurable on both benches, quoted at USD 45-320 per piece in retail-ready box with FNSKU label.
In the Amazon FBA Ready file the failure was already written down. Stamp accuracy sat in the buyer's own incoming report from the previous season and nobody carried it forward, so the same line failed twice, which is how the Amazon FBA Ready account reads it at USD 45-320.
The second run shipped retail-ready box with FNSKU label with the spec stapled to the packing list. Zero rejects on arrival, and the buyer's own bench stopped re-inspecting, which is how the Amazon FBA Ready account reads it at USD 45-320.
Specification is the only part of a metal Guide quote that survives the season. These four measurements are what we write into the retail-ready box with FNSKU label paperwork, priced at USD 45-320 for the 200-piece Amazon FBA Ready run.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
Every line above is measurable with a gauge and a scale. At USD 45-320 per piece, a supplier who cannot state them is selling a photo.
The 200-piece Amazon FBA Ready price splits as below. The line that decides season two is the plating and QC share, not the metal, which is how the Amazon FBA Ready account reads it at USD 45-320.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for metal Guide | 34% | Alloy choice and casting yield |
| Stone or melee for metal Guide | 25% | Sieve range and lot batching |
| Setting and finishing labor for metal Guide | 22% | Jig design and bench minutes |
| Plating, polish and QC for metal Guide | 15% | Per-tray versus per-piece checks |
| Packaging for metal Guide | 4% | retail-ready box with FNSKU label |
Five lines, one price. If the supplier will not break them out, the number being compared is not a metal Guide price, and at USD 45-320 for 200 pieces that is the number the buyer signs.
A 14K stamp on 13.6K metal is a legal exposure, not a cosmetic one. Assay per lot is the only defensible check, and at USD 45-320 for 200 pieces that is the number the buyer signs.
The commercial effect is refining loss plus a legal stamp correction, typically USD 15-28 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is how the Amazon FBA Ready account reads it at USD 45-320.
Two alloy lots of 14K rose can read peach and copper under the same light. Holding a master color chip per order keeps a collection coherent, and the Amazon FBA Ready quote for it sits at USD 45-320.
Our countermeasure is a gauge and a written limit. It adds about 21 seconds per piece and removes the defect from the run rather than from the carton, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 45-320.
A sizing joint soldered with too much flux pits after polish and cracks in wear. Joint inspection belongs in the final QC, not the bench, the figure being USD 45-320 for a 200-piece run.
In a 200-piece run this typically shows on 17 of pieces. Catching it means measuring assay within 0.3K of the stamp at the tray level, not inspecting the finished carton, priced at USD 45-320 for the 200-piece Amazon FBA Ready run.
Amazon treats jewellery as a category where the packaging is part of the compliance file, not an afterthought. A poly bag with an opening of five inches or more needs the suffocation warning printed on it, and every unit needs an FNSKU label that covers the manufacturer barcode rather than sits beside it, which the Amazon FBA Ready file records at USD 45-320 in retail-ready box with FNSKU label.
For metal Guide the practical constraint is that a unit must survive a bin with other units and still read clean at unboxing. We pack each piece in a foam-backed pouch, then the retail box, then the FNSKU on the outside of the pouch, so a warehouse scan never touches the box the customer sees, and at USD 45-320 for 200 pieces that is the number the buyer signs.
Weight and dimension limits decide your freight per unit more than the piece cost does. A single metal Guide in its retail box normally lands under eight ounces, which keeps it in the small standard tier. Anything above that moves a tier and eats the margin you built into the USD 45-320 quote.
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Amazon FBA Ready order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, quoted at USD 45-320 per piece in retail-ready box with FNSKU label.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 45-320 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the retail-ready box with FNSKU label format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, on a 200-piece Amazon FBA Ready order at USD 45-320.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of assay within 0.3K of the stamp for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is USD 45-320 on the Amazon FBA Ready schedule.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 45-320.
Buyers ask it in the first call about metal Guide and rarely get a number they can put in a spreadsheet, which is USD 45-320 on the Amazon FBA Ready schedule.
At 200 pieces the arithmetic on metal Guide changes: the fixed costs spread, the variable costs do not. That is why the second order prices better than the first even when the gold fix has moved up, on a 200-piece Amazon FBA Ready order at USD 45-320.
We quote both a first-run price and a reorder price for metal Guide on the same sheet so the buyer can see where the curve flattens. Most flatten by the third run, which is how the Amazon FBA Ready account reads it at USD 45-320.
The answer for metal Guide depends on four variables, and three of them are under the buyer's control, and the Amazon FBA Ready quote for it sits at USD 45-320.
Buyers who get this wrong on metal Guide usually get it wrong in the first order and correct it in the second. The cost of that correction is rarely the money; it is the four to six weeks of shelf time lost while a replacement run of metal Guide is scheduled behind other orders, on a 200-piece Amazon FBA Ready order at USD 45-320.
Our approach is to write the rule into the metal Guide spec sheet before casting, then test it on the first tray. A rule that only exists in an email is not a rule, and a rule that is not tested is a hope, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 45-320.
Our process is deliberately boring, because boring is what survives a bulk run with several sets of hands on it, which is USD 45-320 on the Amazon FBA Ready schedule.
A first order at 50 pieces per design is a measurement rather than a purchase. It tells you what assay within 0.3K of the stamp and color match to the master chip looks like from this line, on a 200-piece Amazon FBA Ready order at USD 45-320.
The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 45-320.
Put the reject rule in writing before the deposit. The Amazon FBA Ready conversation after arrival is shorter when the rule is on the order already, on a 200-piece Amazon FBA Ready order at USD 45-320.
We ship from Guangzhou or Shenzhen, and the port choice follows the carrier rate rather than a fixed habit, with GRA report and retail-ready box with FNSKU label stated on the same sheet, priced at USD 45-320 for the 200-piece Amazon FBA Ready run.
DDP suits a first Amazon FBA Ready order because the duty invoice arrives after the carton clears, and that is the line buyers forget to budget, which the Amazon FBA Ready file records at USD 45-320 in retail-ready box with FNSKU label.
The arrival check is three steps and none needs a lab: count against the packing list, weigh a sample, measure ten pieces, and the Amazon FBA Ready quote for it sits at USD 45-320.
50 pieces per metal Guide. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, and the Amazon FBA Ready quote for it sits at USD 45-320.
GRA report on metal Guide above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of assay within 0.3K of the stamp, which is what a counter or a listing actually needs, quoted at USD 45-320 per piece in retail-ready box with FNSKU label.
We replace or credit inside the same order cycle. The retained reference tray decides: if stamp accuracy shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, the figure being USD 45-320 for a 200-piece run.
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, which the Amazon FBA Ready file records at USD 45-320 in retail-ready box with FNSKU label.
50 pieces per metal Guide. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, and the Amazon FBA Ready quote for it sits at USD 45-320.
Send a photo or a drawing of the piece you want in retail-ready box with FNSKU label, and the reply carries a price, a calendar and the four measurements, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 45-320.
The factory behind metal Guide here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, on a 200-piece Amazon FBA Ready order at USD 45-320.
Related reading: Metal Guide Shopify DTC: The Sample Approval That Survives Production - HOLYCOME Buying Guides Private Label Carton: Carton Cube, Duty and the Freight Line That Surpr - HOLYCOME
Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.
Contact on WhatsApp service@holycome.comWritten by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.
Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.
Reviewed for accuracy by our quality team before publication. Last updated .