Two buyers ordered the same industry Insight in the same month. One paid 9% less and absorbed 23 rejects out of 800 pieces; the other paid our quote and shipped clean. The difference was stamp accuracy, and it was measurable on both benches, and the Distributor Tier quote for it sits at USD 42-304.
In the Distributor Tier file the failure was already written down. Stamp accuracy sat in the buyer's own incoming report from the previous season and nobody carried it forward, so the same line failed twice, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
The second run shipped bulk carton, 50 per bag with the spec stapled to the packing list. Zero rejects on arrival, and the buyer's own bench stopped re-inspecting, and at USD 42-304 for 800 pieces that is the number the buyer signs.
The 800-piece Distributor Tier price splits as below. The line that decides season two is the plating and QC share, not the metal, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for industry Insights | 34% | Alloy choice and casting yield |
| Stone or melee for industry Insights | 25% | Sieve range and lot batching |
| Setting and finishing labor for industry Insights | 22% | Jig design and bench minutes |
| Plating, polish and QC for industry Insights | 15% | Per-tray versus per-piece checks |
| Packaging for industry Insights | 4% | bulk carton, 50 per bag |
Five lines, one price. If the supplier will not break them out, the number being compared is not a industry Insights price, and at USD 42-304 for 800 pieces that is the number the buyer signs.
Specification is the only part of a industry Insights quote that survives the season. These four measurements are what we write into the bulk carton, 50 per bag paperwork, which the Distributor Tier file records at USD 42-304 in bulk carton, 50 per bag.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Every line above is measurable with a gauge and a scale. At USD 42-304 per piece, a supplier who cannot state them is selling a photo.
A distributor does not buy a industry Insight, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, the figure being USD 42-304 for a 800-piece run.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, shipped as bulk carton, 50 per bag and certified SGS batch report.
Turn is the number the distributor manages. At USD 42-304 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of industry Insights move in 800-piece lots rather than in the 50-piece sample quantity.
A 14K stamp on 13.6K metal is a legal exposure, not a cosmetic one. Assay per lot is the only defensible check, and at USD 42-304 for 800 pieces that is the number the buyer signs.
The commercial effect is refining loss plus a legal stamp correction, typically USD 15-28 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is how the Distributor Tier account reads it at USD 42-304.
Two alloy lots of 14K rose can read peach and copper under the same light. Holding a master color chip per order keeps a collection coherent, and the Distributor Tier quote for it sits at USD 42-304.
Our countermeasure is a gauge and a written limit. It adds about 21 seconds per piece and removes the defect from the run rather than from the carton, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 42-304.
A sizing joint soldered with too much flux pits after polish and cracks in wear. Joint inspection belongs in the final QC, not the bench, the figure being USD 42-304 for a 800-piece run.
In a 800-piece run this typically shows on 17 of pieces. Catching it means measuring assay within 0.3K of the stamp at the tray level, not inspecting the finished carton, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which the Distributor Tier file records at USD 42-304 in bulk carton, 50 per bag.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 42-304 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, and the Distributor Tier quote for it sits at USD 42-304.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of assay within 0.3K of the stamp for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, quoted at USD 42-304 per piece in bulk carton, 50 per bag.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 42-304.
The number is less interesting than the rule behind it, and industry Insights is where that rule gets tested, and the Distributor Tier quote for it sits at USD 42-304.
One practical note on timing for industry Insights: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
We date the industry Insights proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, which is USD 42-304 on the Distributor Tier schedule.
Ask three suppliers of industry Insights this question and you will get three answers. Only one of them survives an inspection, which is USD 42-304 on the Distributor Tier schedule.
In the US market terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For industry Insights, we publish the figure per SKU and hold it for the order window rather than for the calendar year, quoted at USD 42-304 per piece in bulk carton, 50 per bag.
Practically, it shows up in three places for industry Insights: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, shipped as bulk carton, 50 per bag and certified SGS batch report.
Our process is deliberately boring, because boring is what survives a bulk run with several sets of hands on it, which is USD 42-304 on the Distributor Tier schedule.
A first order at 50 pieces per design is a measurement rather than a purchase. It tells you what assay within 0.3K of the stamp and color match to the master chip looks like from this line, on a 800-piece Distributor Tier order at USD 42-304.
We ship from Guangzhou or Shenzhen, and the port choice follows the carrier rate rather than a fixed habit, with SGS batch report and bulk carton, 50 per bag stated on the same sheet, on a 800-piece Distributor Tier order at USD 42-304.
DDP suits a first Distributor Tier order because the duty invoice arrives after the carton clears, and that is the line buyers forget to budget, shipped as bulk carton, 50 per bag and certified SGS batch report.
The arrival check is three steps and none needs a lab: count against the packing list, weigh a sample, measure ten pieces, and the Distributor Tier quote for it sits at USD 42-304.
The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 42-304.
Put the reject rule in writing before the deposit. The Distributor Tier conversation after arrival is shorter when the rule is on the order already, and the Distributor Tier quote for it sits at USD 42-304.
Rhodium at 0.20 micron minimum on white industry Insights, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, the figure being USD 42-304 for a 800-piece run.
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, priced at USD 42-304 for the 800-piece Distributor Tier run.
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, quoted at USD 42-304 per piece in bulk carton, 50 per bag.
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and the Distributor Tier quote for it sits at USD 42-304.
Rhodium at 0.20 micron minimum on white industry Insights, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, the figure being USD 42-304 for a 800-piece run.
Send a photo or a drawing of the piece you want in bulk carton, 50 per bag, and the reply carries a price, a calendar and the four measurements, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 42-304.
The factory behind industry Insights here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, priced at USD 42-304 for the 800-piece Distributor Tier run.
Related reading: Industry Insights Trade Show Sample: What the Quote Actually Covers - HOLYCOME Trends & Styles Shopify DTC: The Sample Approval That Survives Production - HOLYCOME
Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.
Contact on WhatsApp service@holycome.comWritten by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.
Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.
Reviewed for accuracy by our quality team before publication. Last updated .