Gemstone Knowledge

Gemstone Knowledge Made to Order: AQL, Tray Checks and What a QC Report Should Say - HOLYCOME

Gemstone Knowledge Made to Order: AQL, Tray Checks and What a QC Report Should Say - HOLYCOME

SECTION 01Why the Made to Order Quote Looks Cheap Until It Lands

Two buyers ordered the same gemstone Knowledge in the same month. One paid 9% less and absorbed 23 rejects out of 50 pieces; the other paid our quote and shipped clean. The difference was sieve drift, and it was measurable on both benches, with IGI report and single-piece foam box stated on the same sheet.

Nothing in that rejection was exotic. At USD 3-118 per piece and 50 pieces on the order, a sieve drift rate of two percent is a costing error rather than a quality mystery.

Gemstone Knowledge wholesale piece from the HOLYCOME line in Wuzhou

Cost of the fix was about 6 seconds per piece. On 50 pieces that is a few hours at the bench and the whole claim file disappears, priced at USD 3-118 for the 50-piece Made to Order run.

SECTION 02The Made-to-Order Path for gemstone Knowledge

Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, priced at USD 3-118 for the 50-piece Made to Order run.

Twenty days is realistic for a new gemstone Knowledge when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, and 50 pieces leaves Wuzhou in single-piece foam box at USD 3-118.

The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, and 50 pieces leaves Wuzhou in single-piece foam box at USD 3-118.

Gemstone Knowledge setting and finish detail on a HOLYCOME factory sample

SECTION 03What Fails First on gemstone Knowledge

mixed color lots

Mixing near-colorless and G-H stones in one parcel produces a finished piece with a visible tonal step. Parcels ship by single lot, which is how the Made to Order account reads it at USD 3-118.

Our countermeasure is a gauge and a written limit. It adds about 6 seconds per piece and removes the defect from the run rather than from the carton, and at USD 3-118 for 50 pieces that is the number the buyer signs.

girdle damage

Stones packed loose in a bag chip each other in transit. Individually wrapped parcels cost more and arrive usable, on a 50-piece Made to Order order at USD 3-118.

In a 50-piece run this typically shows on 14 of pieces. Catching it means measuring size distribution within the declared sieve at the tray level, not inspecting the finished carton, and the Made to Order quote for it sits at USD 3-118.

sieve drift

A parcel sold as 2.0-2.2 mm with 15% of stones at 1.9 mm changes the setting labor on the buyer's bench. Sieve the parcel, do not sample it, and 50 pieces leaves Wuzhou in single-piece foam box at USD 3-118.

The commercial effect is replacement stones plus a sorting delay on the buyer's line. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is how the Made to Order account reads it at USD 3-118.

SECTION 04The Measurements Behind a USD 3-118 Quote

Four numbers separate a 50-piece run that clears inspection from one that generates a credit note. None of them appears on the sample photo, on a 50-piece Made to Order order at USD 3-118.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit

None of these are premium features. They cost seconds per piece and they remove the reason a buyer has to inspect twice, on a 50-piece Made to Order order at USD 3-118.

SECTION 05MOQ, Samples and the Balance

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which is how the Made to Order account reads it at USD 3-118.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 3-118 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, with IGI report and single-piece foam box stated on the same sheet.

Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of size distribution within the declared sieve for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, priced at USD 3-118 for the 50-piece Made to Order run.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, certified IGI report and packed single-piece foam box at 50 pieces.

SECTION 06What a USD 3-118 Quote Hides

The cost of a gemstone Knowledge in the USD 3-118 band splits roughly as below. The line buyers challenge most is labor, and it is the line that decides whether the piece survives a season.

Cost lineShareWhat moves it
Base metal or alloy for gemstone Knowledge34%Alloy choice and casting yield
Stone or melee for gemstone Knowledge25%Sieve range and lot batching
Setting and finishing labor for gemstone Knowledge22%Jig design and bench minutes
Plating, polish and QC for gemstone Knowledge15%Per-tray versus per-piece checks
Packaging for gemstone Knowledge4%single-piece foam box

If a supplier will not break out the five lines above, the number you are comparing is not a price. It is a total that somebody else assembled from assumptions, priced at USD 3-118 for the 50-piece Made to Order run.

SECTION 07Alloy, Karat and the Cost of a Color Change

The number is less interesting than the rule behind it, and gemstone Knowledge is where that rule gets tested, certified IGI report and packed single-piece foam box at 50 pieces.

Three numbers decide it for gemstone Knowledge: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, on a 50-piece Made to Order order at USD 3-118.

We send a one-page sheet with every gemstone Knowledge quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, and at USD 3-118 for 50 pieces that is the number the buyer signs.

SECTION 08What a Report Proves and What It Does Not

Ask three suppliers of gemstone Knowledge this question and you will get three answers. Only one of them survives an inspection, on a 50-piece Made to Order order at USD 3-118.

There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on gemstone Knowledge and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, priced at USD 3-118 for the 50-piece Made to Order run.

We would rather lose a first order of gemstone Knowledge on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, and at USD 3-118 for 50 pieces that is the number the buyer signs.

SECTION 09A 50-Piece Test Run

At 50 pieces inside single-piece foam box, the first order reads sell-through without betting the season on one model, certified IGI report and packed single-piece foam box at 50 pieces.

Buyers who run that measurement before committing a season usually keep the supplier. Buyers who skip it usually pay twice for the same lesson, the figure being USD 3-118 for a 50-piece run.

SECTION 10The Dock Check on gemstone Knowledge

We ship from Guangzhou or Shenzhen and pick the port on the carrier rate, not on habit. IGI report travels with the shipping documents, quoted at USD 3-118 per piece in single-piece foam box.

DDP removes the duty invoice that arrives after the carton clears, which matters on a first Made to Order order at USD 3-118.

Three steps at the dock: count against the packing list, weigh a sample tray, measure ten pieces. None needs a lab, quoted at USD 3-118 per piece in single-piece foam box.

SECTION 11From Spec to single-piece foam box

The calendar below is what we quote on a 50-piece Made to Order run of gemstone Knowledge. It starts when the spec is signed, not when the deposit clears, and 50 pieces leaves Wuzhou in single-piece foam box at USD 3-118.

  1. Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
  2. Cut the model in wax or resin and photograph it on the gauge before metal is committed.
  3. Cast the first article, set the stones and finish it exactly as bulk will be finished.
  4. Send the first article for approval with the weight and the stone measurements stated.
  5. Run the balance of the order in 25-30 days, holding the approved article as the reference.
  6. Ship with the approved article photographed beside a production piece from the same tray.

A first order of 50 pieces is a measurement, not a purchase. It tells you what size distribution within the declared sieve looks like from this bench, and 50 pieces leaves Wuzhou in single-piece foam box at USD 3-118.

SECTION 12Frequently Asked Questions

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and at USD 3-118 for 50 pieces that is the number the buyer signs.

How long does a reorder of the same gemstone Knowledge take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, quoted at USD 3-118 per piece in single-piece foam box.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white gemstone Knowledge, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, priced at USD 3-118 for the 50-piece Made to Order run.

How is gemstone Knowledge packed for single-piece foam box?

Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, priced at USD 3-118 for the 50-piece Made to Order run.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and at USD 3-118 for 50 pieces that is the number the buyer signs.

SECTION 13Next Step

If you are quoting gemstone Knowledge against another supplier, send that quote. We will mark the four lines where the numbers diverge and let you decide, shipped as single-piece foam box and certified IGI report, and 50 pieces leaves Wuzhou in single-piece foam box at USD 3-118.

The factory behind gemstone Knowledge here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, and at USD 3-118 for 50 pieces that is the number the buyer signs.

Related reading: Metal Guide Private Label Carton: Carton Cube, Duty and the Freight Line That Surpris - HOLYCOME Metal Guide Q4 Holiday Stock: MOQ, Mixed Designs and the Real First Order - HOLYCOME

E

Editorial Team

Senior editor at HOLYCOME, specializing in gemstone identification, jewelry manufacturing, and wholesale sourcing guides.

Looking for Wholesale Jewelry?

Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.

Contact on WhatsApp service@holycome.com

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .