The brief was simple: 800 gemstone Knowledge, moissanite, delivered before November. The run that arrived carried 17 pieces with sieve drift, and the buyer spent USD 5-25 on sorting before the goods reached a shelf, which is how the Distributor Tier account reads it at USD 2-90.
Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and sieve drift is what a photograph fails to define, the figure being USD 2-90 for a 800-piece run.
The fix cost about 6 seconds per gemstone Knowledge and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote, shipped as bulk carton, 50 per bag and certified SGS batch report, quoted at USD 2-90 per piece in bulk carton, 50 per bag.
Cost per piece at USD 2-90 leaves little room for assumption. The table shows which line compresses and which one only moves quality.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for gemstone Knowledge | 30% | Alloy choice and casting yield |
| Stone or melee for gemstone Knowledge | 20% | Sieve range and lot batching |
| Setting and finishing labor for gemstone Knowledge | 19% | Jig design and bench minutes |
| Plating, polish and QC for gemstone Knowledge | 12% | Per-tray versus per-piece checks |
| Packaging for gemstone Knowledge | 19% | bulk carton, 50 per bag |
A factory with no bench minutes per piece has never costed gemstone Knowledge at USD 2-90. Ask for minutes and for the reject rule.
Four lines decide whether gemstone Knowledge at USD 2-90 sells through or comes back, and none of them appears on a typical trading-company quote.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Put these four into the purchase order and the Distributor Tier argument after delivery becomes arithmetic, shipped as bulk carton, 50 per bag and certified SGS batch report.
A distributor does not buy a gemstone Knowledge, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, quoted at USD 2-90 per piece in bulk carton, 50 per bag.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, on a 800-piece Distributor Tier order at USD 2-90.
Turn is the number the distributor manages. At USD 2-90 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of gemstone Knowledge move in 800-piece lots rather than in the 50-piece sample quantity.
A parcel sold as 2.0-2.2 mm with 15% of stones at 1.9 mm changes the setting labor on the buyer's bench. Sieve the parcel, do not sample it, and the Distributor Tier quote for it sits at USD 2-90.
Our countermeasure is a gauge and a written limit. It adds about 6 seconds per piece and removes the defect from the run rather than from the carton, shipped as bulk carton, 50 per bag and certified SGS batch report.
Mixing near-colorless and G-H stones in one parcel produces a finished piece with a visible tonal step. Parcels ship by single lot, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 2-90.
In a 800-piece run this typically shows on 8 of pieces. Catching it means measuring size distribution within the declared sieve at the tray level, not inspecting the finished carton, shipped as bulk carton, 50 per bag and certified SGS batch report.
Stones packed loose in a bag chip each other in transit. Individually wrapped parcels cost more and arrive usable, which is USD 2-90 on the Distributor Tier schedule.
The commercial effect is replacement stones plus a sorting delay on the buyer's line. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 2-90.
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, the figure being USD 2-90 for a 800-piece run.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 2-90 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which the Distributor Tier file records at USD 2-90 in bulk carton, 50 per bag.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of size distribution within the declared sieve for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and the Distributor Tier quote for it sits at USD 2-90.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, quoted at USD 2-90 per piece in bulk carton, 50 per bag.
In US e-commerce, this is the single most negotiated line on gemstone Knowledge and the least documented one, priced at USD 2-90 for the 800-piece Distributor Tier run.
One practical note on timing for gemstone Knowledge: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
We date the gemstone Knowledge proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 2-90.
Nobody quotes it for gemstone Knowledge until something goes wrong, which is exactly why it belongs in the first email, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
In US e-commerce terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For gemstone Knowledge, we publish the figure per SKU and hold it for the order window rather than for the calendar year, the figure being USD 2-90 for a 800-piece run.
Practically, it shows up in three places for gemstone Knowledge: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, which is USD 2-90 on the Distributor Tier schedule.
The sequence below is fixed for a Distributor Tier run. The dates move with the stone lot, not with the shipping season, which the Distributor Tier file records at USD 2-90 in bulk carton, 50 per bag.
Reorders inside this sequence run 12-15 days, because the model and the gauge set stay here after the Distributor Tier shipment, which the Distributor Tier file records at USD 2-90 in bulk carton, 50 per bag.
Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 2-90.
For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge, which is how the Distributor Tier account reads it at USD 2-90.
Check the count, the weight and size distribution within the declared sieve and zero girdle chips on arrival before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns, which the Distributor Tier file records at USD 2-90 in bulk carton, 50 per bag.
A first Distributor Tier order of 50 pieces per design at USD 2-90 is a test of the line, not a commitment to the range.
Ask for the retained tray and the batch report with the first shipment. Both are free and both decide the second order, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces, shipped as bulk carton, 50 per bag and certified SGS batch report.
Rhodium at 0.20 micron minimum on white gemstone Knowledge, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, which is how the Distributor Tier account reads it at USD 2-90.
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, shipped as bulk carton, 50 per bag and certified SGS batch report.
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which the Distributor Tier file records at USD 2-90 in bulk carton, 50 per bag.
Rhodium at 0.20 micron minimum on white gemstone Knowledge, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070 and mark it Distributor Tier, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, and at USD 2-90 for 800 pieces that is the number the buyer signs.
Related reading: Gemstone Knowledge Trade Show Sample: What the Quote Actually Covers - HOLYCOME Metal Guide Shopify DTC: The Sample Approval That Survives Production - HOLYCOME
Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.
Contact on WhatsApp service@holycome.comWritten by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.
Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.
Reviewed for accuracy by our quality team before publication. Last updated .