The brief was simple: 800 certification Explained, 14K/18K gold or platinum with IGI-certified lab-grown diamond, delivered before March. The run that arrived carried 17 pieces with certificate mismatch, and the buyer spent USD 45-230 on sorting before the goods reached a shelf, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
On a 800-piece order at USD 114-931, a certificate mismatch rate above two percent is not a quality surprise. It is a costing error that shows up as a credit note three weeks later.
Nothing in the rebuild was expensive. A gauge, a written limit and a retained tray did the work that a discount would only have delayed, which the Distributor Tier file records at USD 114-931 in bulk carton, 50 per bag.
Cost at USD 114-931 leaves no room for assumption. The table shows which line compresses and which line only moves quality down.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for certification Explained | 30% | Alloy choice and casting yield |
| Stone or melee for certification Explained | 20% | Sieve range and lot batching |
| Setting and finishing labor for certification Explained | 19% | Jig design and bench minutes |
| Plating, polish and QC for certification Explained | 12% | Per-tray versus per-piece checks |
| Packaging for certification Explained | 19% | bulk carton, 50 per bag |
A factory that cannot state its bench minutes per piece has never costed its own line. Ask for minutes and for the reject rule, not for a discount, shipped as bulk carton, 50 per bag and certified SGS batch report, which is USD 114-931 on the Distributor Tier schedule.
At USD 114-931 per piece the four measurements below are worth more than the discount being negotiated. One of them costs nothing to write down.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Write these into the Distributor Tier purchase order and the arrival check becomes arithmetic instead of recollection, which is USD 114-931 on the Distributor Tier schedule.
A distributor does not buy a certification Explained, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, priced at USD 114-931 for the 800-piece Distributor Tier run.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, the figure being USD 114-931 for a 800-piece run.
Turn is the number the distributor manages. At USD 114-931 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of certification Explained move in 800-piece lots rather than in the 50-piece sample quantity.
A stone whose report says VS1 but whose plot shows a cloud near the table reads as a grade dispute at the counter. Match the plot, not only the grade line, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 114-931.
Our countermeasure is a gauge and a written limit. It adds about 26 seconds per piece and removes the defect from the run rather than from the carton, and at USD 114-931 for 800 pieces that is the number the buyer signs.
CVD and HPHT stones behave differently under high heat during setting. Disclosing the method protects both sides in a repair claim, shipped as bulk carton, 50 per bag and certified SGS batch report.
In a 800-piece run this typically shows on 8 of pieces. Catching it means measuring report plot match at the tray level, not inspecting the finished carton, shipped as bulk carton, 50 per bag and certified SGS batch report.
A 62% table in a bright cut reads dark in a store window. Buying by table percentage, not only by carat, keeps the display consistent, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
The commercial effect is stone replacement at a four-figure cost, plus a disclosure review. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which is how the Distributor Tier account reads it at USD 114-931.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 114-931 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, priced at USD 114-931 for the 800-piece Distributor Tier run.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of report plot match for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and the Distributor Tier quote for it sits at USD 114-931.
On certification Explained, the difference between a 40-day order and a 90-day order is usually two signatures, not a factory delay, the figure being USD 114-931 for a 800-piece run.
One practical note on timing for certification Explained: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
We date the certification Explained proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, which the Distributor Tier file records at USD 114-931 in bulk carton, 50 per bag.
Buyers in US wholesale tend to over-index on unit price for certification Explained and under-index on what happens after delivery, priced at USD 114-931 for the 800-piece Distributor Tier run.
In US wholesale terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For certification Explained, we publish the figure per SKU and hold it for the order window rather than for the calendar year, which the Distributor Tier file records at USD 114-931 in bulk carton, 50 per bag.
Practically, it shows up in three places for certification Explained: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Nothing in this sequence is unusual, and that is the point. Each step exists because skipping it produced a specific failure on a previous order, and at USD 114-931 for 800 pieces that is the number the buyer signs.
Reorders inside this sequence run 12-15 days because the model, the gauge set and the signed spec stay in our system, which is USD 114-931 on the Distributor Tier schedule.
Export runs through Guangzhou or Shenzhen. Air lands in 5-8 days on the US west coast, 7-10 on the east, and sea takes roughly three times the transit, on a 800-piece Distributor Tier order at USD 114-931.
FOB is the default on certification Explained and DDP is the option. Buyers new to US wholesale usually take DDP once, then switch after they see the breakdown, with SGS batch report and bulk carton, 50 per bag stated on the same sheet, and the Distributor Tier quote for it sits at USD 114-931.
If certificate mismatch appears in the arrival check, the retained tray decides who owns it. Keep the SGS batch report batch sheet in the same folder as the packing list, quoted at USD 114-931 per piece in bulk carton, 50 per bag.
A first Distributor Tier order of 50 pieces per design at USD 114-931 tests the line rather than the range. Three designs covers the shelf.
Ask for the retained tray and the SGS batch report batch sheet with the first shipment. Both are free and both decide the reorder, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Rhodium at 0.20 micron minimum on white certification Explained, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which is USD 114-931 on the Distributor Tier schedule.
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, which the Distributor Tier file records at USD 114-931 in bulk carton, 50 per bag.
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, priced at USD 114-931 for the 800-piece Distributor Tier run.
Rhodium at 0.20 micron minimum on white certification Explained, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which is USD 114-931 on the Distributor Tier schedule.
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070, subject Distributor Tier, and at USD 114-931 for 800 pieces that is the number the buyer signs.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, quoted at USD 114-931 per piece in bulk carton, 50 per bag.
Related reading: Certification Explained Trade Show Sample: What the Quote Actually Covers - HOLYCOME Gemstone Knowledge Shopify DTC: The Sample Approval That Survives Production - HOLYCOME
Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.
Contact on WhatsApp service@holycome.comWritten by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.
Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.
Reviewed for accuracy by our quality team before publication. Last updated .