Certification Explained

Certification Explained Spec Sheets: Six Fields Buyers Misread - HOLYCOME

Certification Explained Spec Sheets: Six Fields Buyers Misread - HOLYCOME

Every certification explained category tells you what the factory can repeat, if you read it in the right order.

SECTION 01The spec sheet is the contract, not the brochure

A Certification Explained listing can be rewritten in an afternoon. The spec sheet behind it is what production actually works to. The range holds 4460 designs in this category.

Reading six fields correctly removes most of the disputes that show up three months after an order.

The metal split is narrow on purpose: 925 sterling silver at 99% keeps the quote cycle short for most reorders.

Read the metal line as a lead time signal: 925 sterling silver at 99% is the path production already runs every week.

SECTION 02Field by field

FieldWhat it controlsCommon misread
Base metalWear life, repolishingRead as plating colour
Stone and originDisclosure, price bandRead as natural by default
Carat or sizeVisual weight, quoteRead as approximate
Setting typeRepair path, stone securityRead as decorative detail
FinishSurface look, rework costRead as permanent
MOQOrder shape, stock accessRead as negotiable

925 sterling silver accounts for 99% of the designs. Lab grown diamond is the dominant stone at 66%; moissanite makes up 33%.

With 4460 designs on file, the reorder path usually exists before the first order is placed.

SECTION 03Two fields that carry the most risk

Setting type decides whether a stone can be replaced without remaking the piece, and finish decides whether a repolish restores the look or destroys it. Both are cheap to confirm before production and expensive to discover afterwards.

Round cuts lead at 67%, followed by classic at 16%.

lab grown diamond accounts for 66% of the designs, so stone sourcing is already settled for most of the range.

Where the stone changes, the price band usually changes with it, which is why lab grown diamond at 66% anchors the core of the range.

SECTION 04How to test a spec sheet in one afternoon

  • Match the metal stamp on the sample against the stated base
  • Weigh the stone and compare with the carat figure
  • Check the setting from the reverse side, not the front
  • Confirm the finish under daylight, not studio light
  • Ask what the MOQ changes if the design is altered

Reference designs in the range include Round Bezel Moissanite Engagement Ring; Square Bezel Moissanite Engagement Ring; Round Bezel Moissanite Engagement Ring.

The figure of 4460 is worth reconciling against your own shortlist before the quote, because it sets how much of the buy can be stock.

Cuts outside the Round lead are where a range differentiates, and also where a sample request is most likely to come back late.

SECTION 05Turning the sheet into a listing you can defend

A listing built from the sheet survives a returns conversation. A listing built from the photo does not. Copy the six fields across, state them plainly, and remove adjectives that the sheet does not support.

Round at 67% is the cut a photographer can light consistently, which shortens the time from sample to listing.

SECTION 06Range snapshot: Certification Explained by the numbers

Lab grown diamond is the dominant stone at 66%; moissanite makes up 33%.

DimensionReadingBuying note
Designs on file4460Shortlist can come from stock patterns
Dominant metal925 sterling silver (99%)Quote cycle stays short
Dominant stonelab grown diamond (66%)Sourcing already settled
Leading cutRound (67%)Consistent visual language

Lab grown diamond is the dominant stone at 66%; moissanite makes up 33%. Read the snapshot before the shortlist: a category that is narrow in metal but deep in cut behaves differently from one that is the other way round.

SECTION 07Frequently Asked Questions

What if the spec sheet and the sample disagree?

The sample wins for the immediate order, but the disagreement has to be resolved in writing before a reorder, because production will follow the sheet.

Is the MOQ fixed per design?

It is set per design and per production path. Stock patterns carry the lowest minimums.

Can I get the sheet before ordering?

Yes, and it is the normal request. A factory that cannot produce one per design is a risk signal.

How detailed should my own listing be?

At least the six fields above. Detail that matches the sheet is what prevents disputes.

Does finish affect the price?

It can, because some finishes require extra handling. Ask whether the quoted finish is standard or a special request.

If you want to work from the current range rather than from a catalogue PDF, send the two price slots you sell and the size bands you stock. We will reply with the designs that fit, the build on each, and the reorder path. HOLYCOME keeps the full range in one place.

Frequently Asked Questions

What if the spec sheet and the sample disagree?
The sample wins for the immediate order, but the disagreement has to be resolved in writing before a reorder, because production will follow the sheet.
Is the MOQ fixed per design?
It is set per design and per production path. Stock patterns carry the lowest minimums.
Can I get the sheet before ordering?
Yes, and it is the normal request. A factory that cannot produce one per design is a risk signal.
How detailed should my own listing be?
At least the six fields above. Detail that matches the sheet is what prevents disputes.
Does finish affect the price?
It can, because some finishes require extra handling. Ask whether the quoted finish is standard or a special request.
E

Editorial Team

Senior editor at HOLYCOME, specializing in gemstone identification, jewelry manufacturing, and wholesale sourcing guides.

Looking for Wholesale Jewelry?

Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.

Contact on WhatsApp service@holycome.com

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .