Short answer: the USD 8-42 band is not a discount level, it is a specification level. Change the metal thickness, the stone grade or the plating micron and the band moves before anyone discusses margin. The breakdown below shows the five lines, which of them a factory can compress, and which of them only look compressible, and that is the number care and cleaning buyers at USD 8-42 compare first.
Five lines, one hundred percent. Read the share column against the line that moves it, then ask which of those the factory actually controls. Metal and stone are market-priced; labor and finishing are controlled on the bench, and on care and cleaning at USD 8-42 this is the line that moves the margin.
| Cost line | Share of piece | What moves it | Who controls it |
|---|---|---|---|
| Metal for the care and cleaning | 32% | Alloy choice, shank thickness and casting yield | Factory |
| Stone and melee in care and cleaning | 25% | Sieve range, grade band and lot batching | Market plus grade |
| Bench labor per piece | 19% | Setting type, prong count and jig design | Factory |
| Finishing and plating | 14% | Plating micron, polish passes and pre-plate inspection | Factory |
| Packing and the poly bag and hangtag | 10% | Pouch, box, print run and carton count | Buyer choice |
The shares above are for a mid-band specification. Push the plating to 3 microns, or move from melee to a certified centre, and the finishing and stone lines both rise while metal stays flat, with IGI and the poly bag and hangtag on the same sheet as care and cleaning.
Metal is the least negotiable line in a care and cleaning quote, because it is bought by weight and priced by weight. What a factory controls is thickness and yield: a shank 0.2 mm thinner saves a few percent of metal and costs a resizing later, and a casting yield two points better saves more than any discount conversation. Ask for the gram weight per piece at the quoted size, not for a percentage off.
The stone line is where two quotes for the same drawing diverge by double digits, and almost never because one factory is cheaper. It diverges because one is quoting a grade band and the other is quoting a grade. Ask for the band in writing: colour range, clarity range, mm tolerance. A care and cleaning at USD 8-42 with a wide band and one at the same price with a narrow band are not the same product.
Bench minutes decide the labor share, and the setting type decides the minutes. A prong setting and a bezel on the same care and cleaning can differ by several minutes per piece, which at 400 pieces is the difference between one quote and another. Ask for minutes per piece and for the jig that holds the repeat, because a jig is what makes a reorder cost less than the first run.
Finishing is the cheapest line to specify and the most expensive to skip. Rhodium at 0.20 micron with a palladium strike reads white through a season; nominal plating reads white at the counter and yellow at the third month. Pre-plate inspection of casting porosity belongs here too, because plating a porous surface is a six-week delay on a complaint rather than a fix, and on care and cleaning that is the difference between a reorder and a credit note.
Packing is a buyer choice, so it should be quoted separately from the piece. The poly bag and hangtag carries a print run, a carton count and a packing list, and all three are priced per order rather than per piece. Freight is the one line that is not a cost of the care and cleaning at all, which is why landed cost belongs on a second sheet.
| Quantity band | Unit price | What changes |
|---|---|---|
| 50 to 200 pieces | USD 8-42 | Setup amortised over a small run; gauge and sample already paid |
| 200 to 500 pieces | USD 7-38 | Jig and fixture amortised; stone bought in a matched lot |
| 500 pieces and above | USD 6-35 | Dedicated stone procurement and a reserved production slot |
The ladder is arithmetic, not a volume trick. The setup, the gauge and the sample are fixed costs; the metal and stone are not. Splitting them explains why the third band moves less than the second, and on care and cleaning that is the difference between a reorder and a credit note.
A buyer comparing a 50-piece quote with a 500-piece quote is comparing two different products. Compare bands, then decide which band your first two orders actually sit in, because that is the number your margin has to survive, and that is the number care and cleaning buyers at USD 8-42 compare first.
We quote the band before the design is finalised so the buyer can size the first order to the band rather than discover the mismatch after sampling, and on care and cleaning at USD 8-42 this is the line that moves the margin.
Ask each supplier which of the five appears on their invoice history most often. The answer is a better guide to their real price than the quote sheet, and that is the number care and cleaning buyers at USD 8-42 compare first.
| Line | Amount per piece | Note |
|---|---|---|
| Factory price per piece | USD 8-42 | Ex-works, packing included, certificate per the quote |
| Freight and duty allocation | USD 0-4 | Ocean at 400 pieces; DDP quoted separately |
| Landed cost | USD 8-46 | The number your retail multiple has to clear |
| Retail at 3.0x | USD 24-138 | Typical for a boutique with a 55 to 60 percent margin |
A three-times multiple on landed cost is the working assumption for a US boutique; below 2.6 the care and cleaning has to carry the marketing itself. That is why the factory band matters more than the discount.
The multiple is not a pricing opinion, it is a cash constraint. Pieces that sit for two seasons need a higher multiple to pay for the floor space, and pieces that reorder need a lower one, with IGI and the poly bag and hangtag on the same sheet as care and cleaning.
Run the arithmetic on the band you will actually order, not on the 500-piece band you hope to reach. The first two orders are what the cash flow has to survive, and on care and cleaning that is the difference between a reorder and a credit note.
Piece, packing per the poly bag and hangtag, and IGI on the lots above the threshold. Freight, duty, certificate upgrades and private-label print runs are quoted separately so the band stays comparable, and that is the number care and cleaning buyers at USD 8-42 compare first.
Almost always the stone grade band or the bench minutes. Ask for the band in writing and for minutes per piece; a difference under ten percent is specification, above twenty is a different product, and on care and cleaning at USD 8-42 this is the line that moves the margin.
Yes, by 0.2 mm of shank thickness or by a lighter hollow section, at the cost of resize work later. We quote both and state the trade rather than choosing it for the buyer, with IGI and the poly bag and hangtag on the same sheet as care and cleaning.
Vermeil at 3 microns costs more than rhodium at 0.20 micron, and both cost less than the re-plating a nominal finish triggers. The delta is per lot, not per piece, so small runs see it as a setup line, and on care and cleaning that is the difference between a reorder and a credit note.
Yes, as a separate line with the duty assumption stated. DDP is available for US accounts and removes the invoice that otherwise arrives after the carton clears, and that is the number care and cleaning buyers at USD 8-42 compare first.
Send the specification and the quantity band, and the reply breaks the price into the five cost lines with the share of each, so the number can be argued line by line instead of as a whole, and on care and cleaning at USD 8-42 this is the line that moves the margin.
Wuzhou HengliLai Jewelry Co., Ltd. has made care and cleaning under the HOLYCOME label since 2009, at a plant in Wuzhou, Guangxi, running roughly 60,000 pieces monthly. Because casting and setting sit in the same building, a gauge change on the bench reaches the next tray the same week rather than the next shipment. Quotes, drawings and inspection sheets go out from service@holycome.com, or WhatsApp +86 18078079070.
Related reading: Care & Cleaning Wholesale: Ready Stock, Made-to-Order or Private Label First - HOLYCOME Sizing Guide Shopify DTC: The Sample Approval That Survives Production - HOLYCOME
Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.
Contact on WhatsApp service@holycome.comWritten by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.
Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.
Reviewed for accuracy by our quality team before publication. Last updated .