A US buyer of care and Cleaning came to us after 100 care and Cleaning from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: tarnish in transit had drifted far enough that the buyer's own bench could not correct it without recutting, priced at USD 8-44 for the 100-piece Shopify DTC run.
The bench did not miss the defect, it was never asked to look for it. Tarnish in transit was absent from the purchase order, and a defect that is not named cannot be rejected on arrival, and at USD 8-44 for 100 pieces that is the number the buyer signs.
The rebuild held the USD 8-44 quote and changed the plating log, the gauge and the tray rule. Second run shipped gift box with sleeve with zero rejects.
A storefront lives on photography and return rate, not on the wholesale price. The same care and Cleaning that sells at a boutique counter needs a second and third angle, a scale reference, and one photograph of the clasp or gallery because that is the part a customer cannot see before buying, the figure being USD 8-44 for a 100-piece run.
Returns on jewellery from a storefront cluster around sizing and expectation, not quality. Publishing the millimetre width and the exact gram weight cuts the sizing return before it happens, and a printed care card inside the gift box with sleeve cuts the tarnish complaint, priced at USD 8-44 for the 100-piece Shopify DTC run.
Shipping weight decides whether you can offer free carriage. At 100 pieces a mixed carton of care and Cleaning usually breaks into individual mailers under four ounces, which keeps a USPS or carrier rate flat instead of dimensional, quoted at USD 8-44 per piece in gift box with sleeve.

A Shopify DTC quote that states only metal and stone size leaves tarnish in transit undefined, and undefined is what gets rejected on arrival, and 100 pieces leaves Wuzhou in gift box with sleeve at USD 8-44.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Plating thickness | Nominal only | 0.20 micron rhodium logged per lot, 3 microns on vermeil | Wear-through inside one season |
| Surface porosity after polish | Seen after plating | Cast porosity checked before plating, rejects pulled at that stage | Plating blister six weeks later |
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
Nothing here adds cost at USD 8-44. It adds documentation, and documentation is what the gift box with sleeve carton is missing.
A silver surface plated without a palladium strike layer blisters in wear. The strike layer is invisible and essential, priced at USD 8-44 for the 100-piece Shopify DTC run.
The commercial effect is tarnish claims and replacements, typically USD 4-7 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, priced at USD 8-44 for the 100-piece Shopify DTC run.
A 2.1 g ring shipped at 1.85 g passes a casual check and fails a scale. Publish the weighed average per SKU, and at USD 8-44 for 100 pieces that is the number the buyer signs.
Our countermeasure is a gauge and a written limit. It adds about 11 seconds per piece and removes the defect from the run rather than from the carton, the figure being USD 8-44 for a 100-piece run.
Silver that ships without an anti-tarnish strip browns in a humid container. The strip costs 3 cents and removes the most common arrival complaint, the figure being USD 8-44 for a 100-piece run.
In a 100-piece run this typically shows on 17 of pieces. Catching it means measuring silver assay at 92.5% minimum at the tray level, not inspecting the finished carton, which the Shopify DTC file records at USD 8-44 in gift box with sleeve.
Buyers assume the stone dominates the cost of a care and Cleaning. At wholesale it is closer to a quarter, and the labor line is where two quotes for the same drawing diverge by double digits, priced at USD 8-44 for the 100-piece Shopify DTC run.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for care and Cleaning | 32% | Alloy choice and casting yield |
| Stone or melee for care and Cleaning | 23% | Sieve range and lot batching |
| Setting and finishing labor for care and Cleaning | 21% | Jig design and bench minutes |
| Plating, polish and QC for care and Cleaning | 14% | Per-tray versus per-piece checks |
| Packaging for care and Cleaning | 10% | gift box with sleeve |
The cheapest quote for care and Cleaning usually hides its saving in the plating line and the stone grade. Both show up in the second season, not the first, and the Shopify DTC quote for it sits at USD 8-44.
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Shopify DTC order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, shipped as gift box with sleeve and certified IGI report.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 8-44 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the gift box with sleeve format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is how the Shopify DTC account reads it at USD 8-44.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of silver assay at 92.5% minimum for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, quoted at USD 8-44 per piece in gift box with sleeve.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, the figure being USD 8-44 for a 100-piece run.
The number is less interesting than the rule behind it, and care and Cleaning is where that rule gets tested, certified IGI report and packed gift box with sleeve at 100 pieces.
What buyers underestimate on care and Cleaning is the cost of the interruption, not the cost of the piece. A missing 6% of a run stalls a launch, and a stalled launch costs more than the 6% ever did, which is how the Shopify DTC account reads it at USD 8-44.
We plan a 3-5% buffer on first runs of care and Cleaning and tell the buyer it exists. Hiding a buffer and shipping it as production is how a supplier trains a buyer to distrust the count, with IGI report and gift box with sleeve stated on the same sheet.
Ask three suppliers of care and Cleaning this question and you will get three answers. Only one of them survives an inspection, and at USD 8-44 for 100 pieces that is the number the buyer signs.
The commercial version of this question for care and Cleaning is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, with IGI report and gift box with sleeve stated on the same sheet.
That clause matters more than a discount on care and Cleaning. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, the figure being USD 8-44 for a 100-piece run.
The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, the figure being USD 8-44 for a 100-piece run.
Sample in 3-5 days, bulk in 15-20 days under 500 pieces. At 100 pieces the calendar is the same on every Shopify DTC run, and at USD 8-44 for 100 pieces that is the number the buyer signs.
The calendar below is what we quote on a 100-piece run of care and Cleaning. It starts when the spec is signed, not when the deposit clears, on a 100-piece Shopify DTC order at USD 8-44.
MOQ stays at 50 pieces per design on the Shopify DTC program, low enough to test a category and high enough to keep the casting line accountable, the figure being USD 8-44 for a 100-piece run.
For a Shopify DTC order at 100 pieces the carton count decides the freight more than the weight does. gift box with sleeve packs tighter than a display tray, and 100 pieces leaves Wuzhou in gift box with sleeve at USD 8-44.
The freight rate matters less than the clearance terms at USD 8-44 per piece. A duty surprise can cost more than the entire freight line.
At receiving, count cartons, weigh one tray of gift box with sleeve and measure ten pieces against silver assay at 92.5% minimum. Twenty minutes here saves a season, with IGI report and gift box with sleeve stated on the same sheet.
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, certified IGI report and packed gift box with sleeve at 100 pieces.
Rhodium at 0.20 micron minimum on white care and Cleaning, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, and at USD 8-44 for 100 pieces that is the number the buyer signs.
Every unit goes into a foam-backed pouch, then the gift box with sleeve, then the outer carton at 100 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, priced at USD 8-44 for the 100-piece Shopify DTC run.
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, which is USD 8-44 on the Shopify DTC schedule.
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, certified IGI report and packed gift box with sleeve at 100 pieces.
Send one drawing or one competitor sample with your target landed cost. We answer with a tolerance sheet, a cost breakdown and a production calendar in two business days, and at USD 8-44 for 100 pieces that is the number the buyer signs.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across care and Cleaning and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, the figure being USD 8-44 for a 100-piece run.
Related reading: Care & Cleaning Bridal Boutique: How the Second Order Becomes Cheaper - HOLYCOME Sizing Guide Vermeil Upgrade: Alloy, Karat and the Cost of a Color Change - HOLYCOME
Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.
Contact on WhatsApp service@holycome.comWritten by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.
Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.
Reviewed for accuracy by our quality team before publication. Last updated .