Care & Cleaning

Care & Cleaning: Care That Protects Resale: Routine, Storage and What to Avoid - HOLYCOME

Care & Cleaning: Care That Protects Resale: Routine, Storage and What to Avoid - HOLYCOME

Care advice for Care & Cleaning is usually written for the customer. This one is written for the seller, because the care card you print decides the return conversation six months later.

SECTION 01The daily routine

Put Care & Cleaning on last and take it off first. That single rule removes most contact with perfume, hair product and cleaning agents, which are the three causes of plating and stone discolouration.

Wipe with a dry soft cloth after wear. Do not polish plated goods with a rouge cloth; it removes microns.

Write the remedy matrix before the first defect: remake, credit, allowance or rework, each tied to a defect class.

SECTION 02Storage that prevents scratches

Store separately in a pouch or a compartment, with the piece closed. Chains go flat, rings go in a slot, earrings go in pairs.

On Care & Cleaning, scratches come from other jewelry more often than from daily wear.

RiskCausePrevention
TarnishHumidity, sulfurDry storage, e-coat
Plate wearFriction, chemicals0.8+ micron, wipe after wear
ScratchesContact with other piecesSeparate storage
Stone dullnessSoap and lotion filmWarm water, soft brush
Clasp failureRepeated strainClasp check at sale

Read the table as a checklist rather than a recommendation. The right row depends on the price band, the wear pattern and the channel you sell into.

Compare five cost lines instead of two totals. Metal, stone, labour, finishing and overhead explain a gap that a single number hides.

SECTION 03What to avoid, specifically

Chlorine, hot tubs, household cleaners with ammonia, and ultrasonic cleaners on plated or treated stones. Ultrasonic is fine on plain metal, not on a plated piece.

An ultrasonic cycle on a thin plate can lift the finish at the prong tips in one pass.

SECTION 04The care card that reduces returns

Four lines: put on last, wipe after wear, store separately, avoid chlorine. Then one line on replating: what the service costs and how long it takes.

A care card with a replating path turns a complaint into a service. On Care & Cleaning, that is the cheapest retention tool you have.

In practice, the first lot answers more than the quote does. Weigh ten pieces, measure five stones and rub three contact points, and the specification stops being a claim.

SECTION 05What to check before the order

Run the five checks below in order. The first two protect the money, the last three protect the launch date.

  • Put jewelry on last, take it off first.
  • Wipe with a dry cloth after wear.
  • Store each piece separately.
  • Avoid chlorine and ammonia.
  • Print a replating path on the care card.

If a supplier cannot answer three of the five, treat the quote as a starting point rather than a plan. Ask again in writing and keep the answer with the PO.

SECTION 06Frequently Asked Questions

How should Care & Cleaning be cleaned?

Warm water with a drop of mild soap and a soft brush, then dry with a cloth. No ultrasonic on plated or treated pieces.

Why does plating wear at the shank?

It is the contact point. Thickness and a dry wipe after wear are the two controls.

Can I use a silver polishing cloth?

On unplated sterling, yes. On plated goods, no; it removes the plate.

How should jewelry be stored?

Separately, closed, dry. A pouch per piece prevents both scratches and tarnish.

Should the care card mention replating?

Yes, with a cost and a turnaround. It converts a future complaint into a service.

Should I buy stock or made to order?

Stock for the top three designs, made to order for the tail. Stock cover is a calculation from sell-through and lead time.

Send the Care & Cleaning materials. We return a four-line care card plus the replating wording for your packaging. See the full range at Care & Cleaning and HOLYCOME.

Buyers who get consistent lots are not luckier. They wrote the spec down and checked the first carton against it.

E

Editorial Team

Senior editor at HOLYCOME, specializing in gemstone identification, jewelry manufacturing, and wholesale sourcing guides.

Looking for Wholesale Jewelry?

Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.

Contact on WhatsApp service@holycome.com

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .