Buying Guides

The Buying Guides Custom Brief That Survives CAD - HOLYCOME

The Buying Guides Custom Brief That Survives CAD - HOLYCOME

The question that decides a buying guides order is rarely the one printed in the catalogue.

SECTION 01Most custom briefs die in the first render

A brief that says the design should feel delicate gives the CAD team nothing to measure. The range holds 4460 designs in this category.

A brief that survives has numbers, priorities, and one named reference per dimension.

925 sterling silver carries 99% of the designs, which is why a metal change is a scheduling question and not a design question.

The metal split is narrow on purpose: 925 sterling silver at 99% keeps the quote cycle short for most reorders.

SECTION 02What the brief has to pin down

ItemWhat to specifyWhy it matters
Base metal925 sterling silver or an alternativeSets the budget and the finish path
Stonelab grown diamond, size and countDrives the setting and the price
ProportionsShank width, setting height in mmThe two numbers that decide comfort
Size rangeSmallest and largest to be quotedAvoids a re-quote after approval

Lab grown diamond is the dominant stone at 66%; moissanite makes up 33%. Round cuts lead at 67%, followed by classic at 16%.

The figure of 4460 is worth reconciling against your own shortlist before the quote, because it sets how much of the buy can be stock.

SECTION 03Priorities, not adjectives

Rank three things and say which one gives way if the render cannot hold all of them: stone security, setting height, or shank weight. A brief without a priority list gets a render that satisfies none of them.

Reference designs in the range include Round Bezel Moissanite Engagement Ring; Square Bezel Moissanite Engagement Ring; Round Bezel Moissanite Engagement Ring.

lab grown diamond accounts for 66% of the designs, so stone sourcing is already settled for most of the range.

SECTION 04The approval loop

  • Approve the wireframe before the render
  • Check stone seating in the render, not the hero angle
  • Confirm dimensions in millimetres on the drawing
  • Sign off the metal and finish on a physical sample

Each step is cheaper than the one after it, which is why the order matters.

With 4460 designs on file, the reorder path usually exists before the first order is placed.

Round at 67% is the cut a photographer can light consistently, which shortens the time from sample to listing.

SECTION 05What to keep from the process

Keep the approved drawing, the spec sheet and the sample photos together. That file is what makes a reorder a reorder instead of a new project.

Cut coverage leans on Round at 67%, with the remainder spread across quieter shapes.

SECTION 06Range snapshot: Buying Guides by the numbers

Lab grown diamond is the dominant stone at 66%; moissanite makes up 33%.

DimensionReadingBuying note
Designs on file4460Shortlist can come from stock patterns
Dominant metal925 sterling silver (99%)Quote cycle stays short
Dominant stonelab grown diamond (66%)Sourcing already settled
Leading cutRound (67%)Consistent visual language

Lab grown diamond is the dominant stone at 66%; moissanite makes up 33%. Read the snapshot before the shortlist: a category that is narrow in metal but deep in cut behaves differently from one that is the other way round.

SECTION 07Frequently Asked Questions

How long does a custom brief take to prepare?

An hour with the fields above is enough. Most delays come from missing dimensions, not from design debate.

Should the brief include a reference image?

One reference per dimension, clearly labelled as a reference rather than a copy target.

Can the factory change the design during CAD?

They can propose changes, but the priority list decides which proposals are acceptable.

What is the most expensive omission?

Setting height. It is the number that most often forces a rebuild after approval.

Does custom work need a separate MOQ?

Yes. Custom runs are quoted per order and usually carry a higher minimum than stock patterns.

If you want to work from the current range rather than from a catalogue PDF, send the two price slots you sell and the size bands you stock. We will reply with the designs that fit, the build on each, and the reorder path. HOLYCOME keeps the full range in one place.

Frequently Asked Questions

How long does a custom brief take to prepare?
An hour with the fields above is enough. Most delays come from missing dimensions, not from design debate.
Should the brief include a reference image?
One reference per dimension, clearly labelled as a reference rather than a copy target.
Can the factory change the design during CAD?
They can propose changes, but the priority list decides which proposals are acceptable.
What is the most expensive omission?
Setting height. It is the number that most often forces a rebuild after approval.
Does custom work need a separate MOQ?
Yes. Custom runs are quoted per order and usually carry a higher minimum than stock patterns.
E

Editorial Team

Senior editor at HOLYCOME, specializing in gemstone identification, jewelry manufacturing, and wholesale sourcing guides.

Looking for Wholesale Jewelry?

Wuzhou HengliLai Jewelry Co., Ltd. - Professional gemstone and jewelry manufacturer in Wuzhou, China. OEM/ODM services, factory-direct pricing, low MOQ.

Contact on WhatsApp service@holycome.com

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .